/
TM Midi Shoe
The TM hanger is used to support trusses in lower load applications from bottom chord depths 97mm and above. Features & Benefits — New and improved design achieves higher load carrying capacities — Additional side fixings allow for increased uplift capacity — Rear location tab to assist with installation — Economical solution for lower load applications
Material Specification — Galvanised mild steel – Z275
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
Available Sizes
Dimensions (mm)
38
Product Code
Hanger Width (W) (mm)
Hanger Depth (H) (mm)
TM–38 TM–44 TM–50
38 44 50
81 78 75
38
In Situ
H
W
55
New 45 degree skew nailing (other nails omitted for clarity)
(plates omitted for clarity)
Load Data
Fixings (3.4 x 35mm)
Characteristic Capacity (kN)**
Minimum Supported Depth (mm) to achieve Full Uplift Capacity
Minimum Supporting Depth (mm)
Product Code
Solid Timber Header (Min C16)
Header
Skew Nails
Incoming
Uplift
TM–38 TM–44 TM–50
81 78 75
81 78 75
12
2
6
3.32
9.54
**Values obtained from tests carried out by ITW Construction Products Offsite and calculated in accordance with ETAG 015. Values apply to new design only. Please contact Technical Support for further information if required.
The latest most up to date version will always be online and not in print or in downloaded pdf.
103
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker