/
HMH Heavy Multi Hanger
The HMH hanger is designed to support multiple trusses connecting to girders in medium to high load situations. Features & Benefits — High load capacity can be achieved with fixings into the bottom chord only — A variety of fixing details allows increased performance
UKTA–21/0008 UKTA - 21/0008
ETA–20/0999
Material Specification — Galvanised mild steel – Z275 Fixings All fixings supplied with hanger Depth Description 122mm
122 & 147mm Deep
3.35 x 50mm Annular Ring Shank Nails 3.35 x 50mm Annular Ring Shank Nails
147mm 197mm
Paslode PSTS 6.5 x 65mm
197mm Deep
Available Sizes
Dimensions (mm)
65
122 & 147mm deep – 4mm Ø holes
Hanger Depth (mm)
W
Hanger Width (W) (mm)
122
147
197
197mm deep – 6mm Ø holes
65
80
HMH–80–122 HMH–80–147 HMH–80–197 HMH–102–122 HMH–102–147 HMH–102–197
102 118 153 198
– – –
HMH–118–147 HMH–118–197 HMH–153–147 HMH–153–197
–
HMH–198–197
H
In Situ Bottom Chord Fixing:
Ridge Connections:
100
Please discuss suitability with Technical Support
Load Data
Dimensions (mm)
Fixings
Characteristic Capacity (kN)
Hanger Depth (mm)
Header (3.35 x 50mm)
Incoming (3.4 x 35mm)
Solid Timber Header (Min TR26)
H
Uplift**
122 147
122 145
24 34
10 10
9.83 9.83
26.08 32.45
Header (PSTS 6.5 x 65mm)
Incoming (3.4 x 35mm)
197
195
18*
10
9.83
39.49
**Supported timber must be at least hanger height to achieve full uplift capacity. For reduced fixing capacity please contact Cullen Technical. Incoming trusses must be connected together to act as a single unit.
*Screw has an outer diameter of 6.5mm to be driven through 6mm diameter hole.
The latest most up to date version will always be online and not in print or in downloaded pdf.
105
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker