/
IR–CLIP Insulation Retaining Clip
The IR–Clip allows for the use of high performance rigid insulation within a timber frame panel, whilst maintaining a service gap. Features & Benefits — Snap–off detail splits the IR–Clip into two halves, for use on multiple studs or single use applications i.e panel ends — Speeds up panel manufacturing time, as insulation and OSB can be fitted from the same side — Toothed profile to allow easy installation with no nails or screws required — Guaranteed service void (2No IR–Clips can be used to create two void areas within a panel) — Can be used in accordance with the Structural Timber Association fire safety in use Volume 1 - Pattern Book systems (Insulation - “factory fitted using metal clips to timber manufacturer’s details”)
50 – 100MM DEEP
Material Specification — Galvanised mild steel – Z275
Dimensions (mm)
Fig. 1 Toothed Base Plate
110 – 130MM DEEP
38
38
Available Sizes
Height (H) (mm)
Product Code
H
H
IR–Clip–70 IR–Clip–100 IR–Clip–110 IR–Clip–120 IR–Clip–130
70
100 110 120 130
In Situ Quantity required to be confirmed by Building Designer / Manufacturer (Non Structural item)
50 – 100MM DEEP
110 – 130MM DEEP
Single Stud Application:
Double Stud Application:
The latest most up to date version will always be online and not in print or in downloaded pdf.
33
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker