/
I–CLIP Multiple I–Joist Connector
The I–Clip is a single piece connector for joining 2 ply I–Joists together eliminating the need for filler blocks. Features & Benefits — Quick and simple to install with flared end for ease of install — Safely joins joists together allowing them to act as a single unit — Visible connections to ensure compliance
GB Patent: 2411216
UKTA–21/0010 UKTA - 21/0010
ETA–20/1073
Material Specification — Galvanised mild steel – Z275
Fixings Code
Description
Box Qty
547389 141185
3.4 x 35mm Square Twist Nails – LOOSE 3.4 x 35mm Square Twist Nails – COLLATED*
500
2,500
*For use with Paslode PPNXi
In Situ
Dimensions (mm)
MIN 125MM
MAX 200MM
50
67
H
F
Installation either side of incoming point load to be maximum 200mm from joist edge.
Installation on joist end to be minimum 125mm away from the end of the joist to allow adequate space for fixing.
Available Sizes
Flange Depth (F) (mm)
Joist Manufacturer
200
220
235
240/241
245
300/302
350
360
400
James Jones (JJI)
45
–
I–220–46
I–235–46
–
I–245–46
I–301–46
I–350–46
–
–
Metsawood (FJI)
36 & 39
I–200–38
I–220–38
–
I–241–38
–
I–301–38
–
I–360–38
I–400–38
Steico (SJI)
39
I–200–38
I–220–38
–
I–241–38
–
I–301–38
–
I–360–38
I–400–38
Masonite/Staircraft
47
–
I–220–47
–
I–241–47
–
I–301–47
–
–
–
Part is not width dependent
The latest most up to date version will always be online and not in print or in downloaded pdf.
90
Technical support 01592 771132 / technical@itwcp.com / https://www.itwcp-offsite.co.uk
Made with FlippingBook Annual report maker