Appl. Sci. 2025 , 15 , 9036
12of 13
Author Contributions: Investigation, M.-S.P., C.-H.K., H.-H.P., J.-H.P. and J.-S.L.; Data curation, M.-S.P. and H.-H.P.; Writing—original draft, M.-S.P.; Writing—review & editing, M.-S.P. and C.-H.K.; Visualization, J.-H.P. and J.-S.L. All authors have read and agreed to the published ver- sion of the manuscript. Funding: This research was funded by the Basic Science Research Program via the National Re- search Foundation of Korea (NRF), funded by the Ministry of Education (Grant No. RS-2022- NR07562261382116530004). It was also supported by the Korea Basic Science Institute (National Research Facilities and Equipment Center) grant funded by the Ministry of Education (Grant No. RS-2022-NF000850). Institutional Review Board Statement: Not applicable. Informed Consent Statement: Not applicable. Data Availability Statement: No new data were created or analyzed in this study. Data sharing is not applicable to this article. Conflicts of Interest: The authors declare no conflict of interest.
References 1. Wang, X.; Li, K.; Liu, J.; Chen, X. High Performance of Paper Strength and Energy Savings in OCC Recycling by Micro-fibrillated Cellulose Addition. Bio-Des. Manuf. 2022 , 5 , 1–13. 2. Villanueva, A.; Wenzel, H. Paper waste—Recycling, incineration or landfilling? A review of existing life-cycle assessments. Waste Manag. 2007 , 27 , S29–S46. [CrossRef] 3. Nguyen, T.; Li, K.; Wang, X. The Influence of Refining Energy and Intensity on the Properties of OCC Pulp. Appita J. 2018 , 71 , 404–412. 4. Monte, M.C.; Fuente, E.; Blanco, A.; Negro, C. Waste management from pulp and paper production in the European Union. Waste Manag. 2009 , 29 , 293–308. [CrossRef] 5. Ryu, J.H.; Kim, C.H.; Lee, J.Y.; Lee, J.S.; Lee, C.H.; Park, J.H. Study of Refining Effect of Mixed Pulps Using Refiner Plates with Different Bar Patterns. Appl. Sci. 2022 , 12 , 11445. [CrossRef] 6. Eriksen, Ø.; Syverud, K.; Gregersen, Ø. Viscosity and surface charge of microfibrillated cellulose produced by two different methods. Cellulose. 2008 , 15 , 875–880. 7. Liu, J.; Chen, X.; Li, K.; Wang, X. Comparison of two bar edge lengths of refining plates on the properties of American old corrugated container pulp during low consistency refining. BioResources 2019 , 14 , 8495–8513. 8. Guo, X.; Dong, J.; Liu, H.; Duan, C.; Yang, R.; Qi, K. Effect of Combined Refining Plates with Different Bar Angles on Pulp and Paper Properties. J. Korean Wood Sci. Technol. 2020 , 48 , 581–593. [CrossRef] 9. Karlström, A.; Eriksson, K. Refining and the energy–quality relationship: A model-based approach to optimize refining perfor- mance. Nord. Pulp Pap. Res. J. 2014 , 29 , 493–505. 10. Lee, T.G.; Park, H.H.; Park, M.S.; Park, J.H.; Lee, J.J.; Kim, C.H. Effect of Plate Patterns on TMP Refining Performance. J. Korea TAPPI 2023 , 55 , 138–149. [CrossRef] 11. Gu, H.G.; Min, B.G.; Lee, J.Y.; Park, S.H.; Lee, M.S.; Lee, C.Y.; Kim, C.H. Mechanical modification of softwood pulp fibers using a novel lightweight vertical bar plate. Tappi J. 2021 , 20 , 241–251. [CrossRef] 12. Bajpai, P. Recycling and Deinking of Recovered Paper ; Elsevier: Amsterdam, The Netherlands, 2013. 13. Xu, Y.; Zhan, H.; Lucia, L.A. Effects of recycling on fiber and handsheet properties: Comparison of softwood and hardwood kraft fibers. BioResources 2013 , 8 , 5986–5995. 14. Lumiainen, J. Refining of chemical pulp. In Papermaking ; Part 1; Springer: Cham, Switzerland, 2000; pp. 86–122. 15. Gharehkhani, S.; Sadeghinezhad, E.; Kazi, S.N.; Yarmand, H.; Badarudin, A.; Safaei, M.R.; Zubir, M.N. Basic effects of pulp refining on fiber properties—A review. Carbohydr. Polym. 2015 , 115 , 785–803. [CrossRef] 16. Bao, Z.; Xue, Y.; Chen, X.; Wang, Y.; Wang, J.; Liu, Y.; Shao, Z. Cellulose-based nanomaterials in targeted tumor chemotherapy: A comprehensive review of design, delivery, and clinical potential. Ind. Crops Prod. 2025 , 234 , 121461. [CrossRef] 17. ISO 5264-1:1979 ; Pulps—Laboratory Beating, Part 1: Valley Beater Method. International Organization for Standardization: Geneva, Switzerland, 1979. 18. ISO/TS 11371:2023 ; Pulps—Guidelines for Using Laboratory Refiners to Simulate Industrial Low Consistency Refining. Interna- tional Organization for Standardization: Geneva, Switzerland, 2023. 19. ISO 5267-2:2001 ; Pulps—Determination of Drainability, Part 2: “Canadian Standard” Freeness Method. International Organization for Standardization: Geneva, Switzerland, 2001.
Made with FlippingBook flipbook maker