Appl. Sci. 2025 , 15 , 9036
13of 13
20. ISO 23714:2014 ; Pulps—Determination of Water Retention Value (WRV). International Organization for Standardization: Geneva, Switzerland, 2014. 21. ISO 5269-1:2005 ; Pulps—Preparation of Laboratory Sheets for Physical Testing, Part 1: Conventional Sheet-Former Method. International Organization for Standardization: Geneva, Switzerland, 2005. 22. ISO 5270:2022 ; Pulps—Laboratory Sheets—Determination of Physical Properties. International Organization for Standardization: Geneva, Switzerland, 2022. 23. Elahimehr, A. Low Consistency Refining of Mechanical Pulp: The Relationship Between Plate Pattern, Operational Variables and Pulp Properties. Ph.D. Thesis, University of British Columbia, Vancouver, BC, Canada, 2014. 24. Paulapuro, H. Paper and Board Grades. In Papermaking Science and Technology ; Book 18; Finnish Paper Engineers’ Association: Helsinki, Finland, 2000; pp. 53–54. 25. Roux, J.C. The effect of pulp consistency and average fiber length on the power consumption and refining efficiency in LC refining. J. Wood Sci. 2001 , 48 , 869–877. 26. Liu, H.; Dong, J.; Qi, K.; Guo, X.; Yan, Y.; Qiao, L.; Duan, C.; Zhao, Z. Effect of Pulp Properties on the Power Consumption in Low Consistency Refining. J. Wood Sci. 2020 , 48 , 869–877. [CrossRef] 27. De Assis, T.; Reisinger, L.W.; Pal, L.; Pawlak, J.; Jameel, H.; Gonzalez, R.W. Understanding the effect of machine tech-nology and cellulosic fibers on tissue properties–A review. BioResources 2018 , 13 , 4593–4629. [CrossRef] 28. Sandberg, C.; Ferritsius, R.; Ferritsius, O. Energy efficiency in mechanical pulping—Definitions and considerations. Nord. Pulp Pap. Res. J. 2022 , 76 , 430–440. [CrossRef] 29. Hubbe, M.A.; Bowden, C. Handmade paper: A review of its history, craft, and science. BioResources 2009 , 4 , 1736–1792. [CrossRef] 30. Andreasson, B.; Paulapuro, H. Fibre surface area and water retention—Effect of refining. Nord. Pulp Pap. Res. J. 2002 , 17 , 330–334. 31. Luo, Y.; Haapala, A.; Ni, Y. Effect of refining on pulp fiber properties and water retention. BioResources 2017 , 12 , 5832–5843. 32. Hubbe, M.A. Paper’s bulk and porosity: Influence of beating/refining. BioResources 2007 , 2 , 281–318. 33. Hafrén, J.; Fernando, D.; Gorski, D.; Daniel, G.; Salomons, F.A. Fiber-and fine fractions-derived effects on pulp quality as a result of mechanical pulp refining consistency. Wood Sci. Technol. 2014 , 48 , 737–753. [CrossRef] 34. Liu, H.; Dong, J.; Pu, Y.; Guo, X.; Qiao, L.; Yan, Y. Effect of Refiner Plate Bar Angle and Pulp Properties on the Low Consistency Refining Efficiency in Terms of Power Consumption. Pap. Biomater. 2023 , 8 , 123–134. [CrossRef] 35. Mok, W.S.L.; Pelton, R. Preserving fiber length during refining: Impacts on tear strength and paper properties. J. Pulp Pap. Sci. 2014 , 40 , 49–56. Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Made with FlippingBook flipbook maker