20
g11. _____ Explain the compressed air solenoid interlock g12. _____ Go to the AMU main control panel and point out/explain the purpose of: g12a. _____ main disconnect switch g12b. _____ fuses for VFD and control circuit g12c. _____ supply and exhaust VFDs g12d. _____ control transformer
g12e. _____ carel controller g12f. _____ flame controller g12h. _____ high temp limit g12i. _____ gas pilot line (regulator, solenoid, test ports) g12j. _____ main gas line (regulator, blocking valves, actuator, high pressure switch, test ports) g12k. _____ profile damper and actuator g12l. _____ MFG sticker, schematic, and manual on door g13. _____ Show the location of the AMU inlet/discharge damper g14. _____ Show the location of the booth temperature probe g15. _____ Show the location of the booth exhaust fan(s) g15a. _____ belts tension needs to be inspected/adjusted after the first 40 hours of use, then follow the PM in the manual. g15b. _____ fan bearings are sealed/non-serviceable g16. _____ Show the location of the AMU fan g16a. _____ belts tension needs to be inspected/adjusted after the first 40 hours of use, then follow the PM in the manual. g16b. _____ fan bearings are to be lubricated per the PM schedule in the manual.
20
Made with FlippingBook - professional solution for displaying marketing and sales documents online