MRN_910051_Commercial Catalog

Webasto coolant heaters BlueCool MyTouch Display Therm Pro 90

Thermo Pro 90 Marine – state-of-the art controller and easy service This device is ideal for daily use: infinitely variable power adjustment, high heat output, compact dimensions, service- friendly technology and an extremely low noise level.

This 44’ sailing yacht uses convectors for all cabins to heat the boat. Convectors are noiseless and do not consume any electrical power off the battery, therefore resulting in a very high elec- trical autonomy.

Technical specifications

Thermo Pro 90

Heating power (kW) Heating power (BTU/ h)

1.8 – 7.6 kW; boost mode 9.1 6,100 – 26,000 BTU / h; boost mode 31,000

Fuel, Fuel consumption,

partial/full load/boost (l / h) Fuel, Fuel consumption, partial/full load/boost (gal / h)

Diesel 0.18 – 1.08/1.3 Diesel 0.05 – 0.24/0.34

Rated voltage (V)

12, 24

Rated power consumption (W)

20 – 83 (90 Boost), 3.0 – 6.9 amps (7.5 Boost) at 12 V, 1.5 – 3.5 amps (3.8 Boost) at 24 V

Flow rate of circulating pump (against 0.3 bar) (l / h) Flow rate of circulating pump (against 0.3 bar) (gal /min.) Dimensions L x W x H (mm) Dimensions L x W x H (inch)

700 3.1

In this 40’ motor yacht electrical fan blowers are used to heat up the boat. They are very compact and may be easily installed in small spaces, blowing hot air through air ducts into each cabin. The windscreen has a separate blower to demist and defrost.

352 x 131 x 232 13.9 x 5.2 x 9.1

Weight (kg) Weight (lbs)

5.3 11.7

The advantages of the Thermo Pro 90:  Ideal for daily use  Infinitely variable power adjustment  High heat output  Compact dimensions  Service friendly technology  Extremely low noise level

50

Made with FlippingBook Online newsletter