TREX SIGNATURE ® HORIZONTAL MESH RAILING Installation Instructions
HOW TO INSTALL RAILING BRACKETS
NOTES: » FOR EASE OF INSTALLATION, IT IS RECOMMENDED TO USE THE TREX SIGNATURE RAIL TEMPLATES TO ATTACH BRACKETS TO SIGNATURE POSTS OR 4X4 POST SLEEVES (SOLD SEPARATELY). » DO NOT USE IMPACT DRIVER WHEN INSTALLING SIGNATURE RAILING, ONLY USE STANDARD DRILL FOR SCREW ATTACHMENT OF BRACKET TO POSTS AND RAILS. » SEE OTHER NOTES BELOW DEPENDING ON THE POST/POST SLEEVE THAT IS BEING INSTALLED BEFORE INSTALLATION OF BRACKETS. IMAGES BELOW DO NOT REFLECT SPECIFIC POST/POST SLEEVE APPLICATION. » U SE A CLAMP TO HELP HOLD BRACKETS IN PLACE WHILE FASTENING WITH SCREWS.
HOW TO INSTALL HORIZONTAL FIXED BRACKETS
1. Measure 1-7/8" (4.8 cm) up from deck surface.* Mark with light line.
4A. If installing Signature Post, center upper
1
4
bracket on post above marked line and attach using three self-tapping screws (provided) .
1-7/8" (4.8 cm)
4B. If installing 4x4 post sleeve or Aluminum post sleeve, center upper bracket on post above marked line and attach using three 2" (5.1 cm) wood screws (provided) . 4C. If installing 6x6 post sleeve, center upper bracket on post above marked line and attach using three 2-1/2" (6.4 cm) wood screws (not provided). NOTES: • IMPORTANT – If installing a post sleeve with a one-piece skirt, ensure the skirt is installed BEFORE installing lower bracket. • *Optional measurement if installing Signature Post: Measure from top of base plate 1-3/8" (3.5 cm) as well as 34" (86.4 cm) for 36" (92 cm) rail height or 40" (101.6 cm) for 42" (107 cm) rail height.
2
2. M easure 34 1/2" (87.6
cm) for 36" (92 cm) rail height or 40 1/2" (102.8 cm) for 42" (107 cm) rail height up from decking surface.* Mark with light line.
34-1/2" (87.6 cm) or 40-1/2" (107 cm)
3
3A. If installing Signature Post, center lower bracket on post above the marked line and attach using two self-tapping screws (provided) .
• Upper bracket is not required in Signature crossover post configuration.
3B. If installing 4x4 post sleeve or Aluminum post sleeve, center lower bracket on post above the marked line and attach using two 2" (5.1 cm) wood screws (provided) . 3C. If installing 6x6 post sleeve, center lower bracket on post above the marked line and attach using two 2-1/2" (6.4 cm) wood screws (not provided) .
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
TR-SIGNATUREMP-0825
Made with FlippingBook Digital Publishing Software