PAAS SB 4.4 (Oct 2021)

Important Note: The technical data given in this catalogue is for preliminary information purposes only, and is published without guarantee. All pictures are for illustrative purposes only and should not be regarded as wholly accurate in every detail.We reserve the right to withdraw or alter the specification on any product without notice. Please consult our General Conditions of Supply. Plastic Material Temperature Chart - (Water at 23 deg C) This chart provides an indication of Material performance, however consideration needs to be given to Chemicals conveyed and operating pressure.

PAAS Newsletter Our Monthly email Newsletter Contains: Product Feature, Installation & Application Tips , Competition and Events. Sign up by visiting our website www.paas.com.au or scanning the QR code.

Locations PAAS Branches are located in Victoria and South Australia.

VICTORIA (SOUTH) 10 Austral Place Hallam VIC 3803

VICTORIA (WEST) 6/3-5 Weddel Court Laverton North VIC 3026

SOUTH AUSTRALIA 17 Birralee Road Regency Park SA 5010

Field Support PAAS technical support staff are located in Victoria , New South Wales and South Australia

VICTORIA 1300 747 464

NSW 0400 668 253

SOUTH AUSTRALIA 08 8345 5551

1300 PIPING (1300 747 464) Email: sales@paas.com.au www.paas.com.au

PVC-U

Instrumentation

178

Water Analysis

180 184 186 214 216 218 220 222

PVC-U Pipe And Fittings

Transmitters Overview

PVC-U Valves

20 36 46

Flow

PVC-U Actuated Valves

pH/ORP Sensors

Large Bore Metric OD d160 - d400mm

Conductivity Resistivity Temperature/ Pressure

Pressure Gauges

Level

C-PVC

Dosing

226

C-PVC Pipe and Fittings

52 58 70

Suction Lance/Foot Valve Calibration Column Pressure Relief Valves

228 229 230 231 232 233 234 235 236 238 240 241

C-PVC Valves

C-PVC Actuated Valves

Pulsation Dampener Withdrawable Lance

Injection Valves Gauge Guards

ABS

Water Jet Suction Pump

ABS Pipe and Fittings

80 86 90

Static Mixer

ABS Valves

Dosing Pumps DDA/DDA-XL Dosing Tube & Connectors

ABS Actuated Valves

Braided Hose

Accessories

242

PP-H

Rubber Bellows

243 244 246 248 250 252 253 254

PP-H Pipe

100 102 106 110 120

Pipe Clips Camlocks

PP-H Socket Fusion Fittings PP-H Butt Weld Fittings

Stainless Steel Threaded Fittings

PP-H Valves

Metal Valves

PP-H Actuated Valves

Solid Plastic Rod and Sheet

Acrylic Cement Solenoid Valves

130

Secondary Containment

256

PE Pipe

134 136 144 146 148

CONTAIN-IT Plus (SCS)

258 268 274

PE Fittings PE Saddles PE Valves

Double See

Contain-it (Retrofit)

Compression Fittings

Machines and Tools Solvent Cementing Guide Solvent Cementing Tools

280

280 282 286 288 290 292 293

Electrofusion Socket Fusion

PVDF

150

Butt Weld & IR Weld

PVDF Pipe

152 154 156 160 170

BCF Weld Pit Pump

PVDF Socket Fusion Fittings PVDF IR/Butt Weld Fittings

PVDF Valves

Ring Drilling Pattern Chart

294

PVDF Actuated Valves

Industrial Grey PVC-U Pipe and Fittings

PVC-U Overview

Polyvinyl chloride (PVC) is one of the most broadly used thermoplastic materials, common to many industries. PVC is highly resistant to acids, alkalis, alcohols, and many other corrosive materials. The wide range of joining options that includes solvent welding, threaded and mechanical connections that make it ideal for easy, error free installations.

Also called PVC-U, this pipe can be alternatively be marked as PVCI

Technical Specification  PAAS range of PVC is grey in colour  Size range available 1/4” to 16”  Temperature range 0 - 60°C  Threaded connection options BSP & NPT  Approvals ASTM D1784, NSF, AS4020.

Pressure Rating  SCH80 see chart under pipe  BS fittings rated to PN15  Moulded or cut threads are rated at 50% of solvent cement fittings  Flanges without metal backing ring 10 Bar.

Jointing Methods

Jointing method for PVC-U is solvent cementing. Where the use of a primer and cement is required for good jointing. See page 282 for more information on jointing techniques and tools.

PVC-U

PVC-U Pipe And Fittings

PVC-U Valves

20 32 40 46

PVC-U Pressure Regulating Valves

PVC-U Actuated Valves

Large Bore Metric OD d160 - d400

2 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

More than 90% of pipe joint failures evaluated are due to improper preparation of pipe end.

Pipe Preparation:

 Cut pipe clean and square  A 10-15 deg chamfer is required  This enables correct seating of pipe into fitting

 The strongest bond is the fused surface where the pipe & fitting meets at the end.  When chamfering and the cut is correct, the pipe will seat at the bottom of the fitting.

Cement Overview:

1. The jointing surfaces must be softened and made semi fluid

2. Sufficient solvent cement must be applied to fill the gap between the pipe and fitting.

4. Joint strength develops as the solvents escape from the joint.

3. Assembly of the pipe and fitting must be made while the surfaces are wet and the solvent cement is still fluid.

Installation Accessories:  Please see page 284-285 for a complete list of brushes and installation accessories.

CODE

IPS Weld on Cement 473ml

IPS724-473

IPS Weld on Cement 946ml

IPS724-946

IPS Weld on Primer 473ml

IPSP70-473

IPS Weld on Primer 946ml

IPSP70-946

Deburring Tool 1/2” - 1”

DEB1IPS

Deburring Tool 1-1/4” - 2”

DEB1-2IPS

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 3

Industrial Grey PVC-U Pipe And Fittings

PVC-U Pipe

PVC-U Grey SCH80 Pipe (5.8M)

PVC-U Clear SCH40 Pipe (3M)

SIZE 1/4” 3/8” 1/2” 3/4”

I.D.

O.D.

WALL

CODE

SIZE 1/4” 3/8” 1/2” 3/4”

I.D.

O.D.

WALL

CODE

7.3 13.7 10.3 17.2 13.4 21.4 18.4 26.8 23.6 33.6 31.3 42.3 37.2 48.7 48.0 60.0 58.0 72.7

3.2 8008 002 3.5 8008 003 4.0 8008 005 4.2 8008 007 5.0 8008 010 5.5 8008 012 5.8 8008 015 6.0 8008 020 7.4 8008 025

- -

n/a n/a

15.3 21.4 20.5 26.8 26.2 33.6 34.6 42.3 40.5 48.7 51.9 60.0 62.0 72.7

3.1 3.2 3.7 3.9 4.1 4.1 5.4 5.9 6.3 7.2 8.6

4004 005 4004 007 4004 010 4004 012 4004 015 4004 020 4004 025 4004 030 4004 040 4004 060 4004 080

1”

1.25”

1.5”

2”

2.5”

3” 4”

72.5 89.0 95.0 114.0

8.3 8008 030

3”

77.3 89.0

9.5 8008 040 6” 141.8 167.5 12.9 8008 060 8” 192.2 219.1 13.5 8008 080

4” 101.5 114.0 6” 153.1 167.5

8”

202 219.1

10” 12”

241 273 16.0 8008 100

10”

253 273

4004 100

287 324 18.5 8008 120 14” 315.2 355.6 20.2 8008 140 16” 361.0 406.4 22.7 8008 160

12’’

302 324

4004 120

 5” pipe available on request

SCH80 PVC-U Pressure Rating of Pipe at Service Temperature (bar) ` ` Moulded or cut threads are rated at 50% of solvent cemented system ` ` SCH40 rating available on request

SIZE

23°C

32°C

38°C

43°C

49°C

54°C

60°C

15 mm 1/2” 20 mm 3/4”

55.427 47.403 43.407 35.828 32.452 27.836 29.283 25.838 22.324 19.223 16.949

43.820 35.552 32.590 26.871 24.322 20.877 21.979 19.361 16.743 14.400 12.747

36.241 29.351 26.871 22.186 20.119 17.294 18.121 16.054 13.849 11.920 10.542

29.214 23.702 21.704 17.914 16.192 13.918 14.607

23.357 18.948 17.363 14.331 12.953 11.162 11.713

17.570 14.193 13.022

12.884 10.404

25 mm

1”

9.577

32 mm 1.25” 40 mm 1.5”

10.748

7.855 7.166 6.132 6.408 5.719 4.892 4.203 3.721

9.715 8.337 8.750 7.786 6.683 5.788 5.099

50 mm

2”

65 mm 2.5”

80 mm

3” 4” 6” 8”

12.953 11.162

10.335

100 mm 155 mm 195 mm

8.957 7.717 6.752

9.646 8.475

4 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

Imperial Pipe clip to suit SCH80/SCH40 Pipe

 Spacer will add 20mm height to clip

SIZE TYPE INSTALLATION BOLT

PIPE CLIP

SPACER TO SUIT (20mm)

167 061 155

3/8’’ 1/2” 3/4”

A A A A

SINGLE SINGLE SINGLE SINGLE

167 061 085 167 061 086 167 061 087 167 061 088

167 061 156

 Type A

167 061 157

167 061 158

1”

167 061 159

1.25”

SINGLE

167 061 089

 Type B

167 061 160

1.5”

B B B

SINGLE SINGLE SINGLE

167 061 090 167 061 091 167 061 112 167 060 038 167 061 013 167 060 064 167 061 114 167 060 067 167 060 070

167 061 161

2”

167 061 162

2.5”

3” 3” 4” 4” 6” 8”

C D C D C C

DOUBLE

N/A

 Type C

SINGLE

167 061 163

DOUBLE

N/A

SINGLE

167 061 164

DOUBLE DOUBLE

N/A N/A

 Spacer

Technical Guide: Pipe Clip Spacing

` ` Recommended distance in M for Pipe clip spacing

SCH80 Spacing Distance

SCH40 Spacing Distance

SIZE 15°C 26°C

37 °C

48 °C

60 °C

SIZE 15°C 26°C

37 °C

48 °C

60 °C

1.4 0.9 0.8

1.2 0.8 0.8

1/2” 3/4”

1.5 1.7 1.8 1.8 2.0 2.1 2.3 2.4 2.7 3.0 3.4

1.4 1.5 1.7 1.8 1.8 2.0 2.3 2.3 2.6 2.9 3.2

1/2”

1.4

1.4 0.9 0.8

1.2 0.8 0.8

3/4”

1.5 1.7 1.7 1.8 1.8 2.1 2.1 2.3 2.6 2.7

1.4 1.5 1.7 1.7 1.7 2.0 2.1 2.1 2.4 2.6

1.5 1.1 0.9

1”

1.4 0.9 0.8

1”

1.7 1.1 0.9

1.25”

1.5 0.9 0.9

1.25”

1.7 1.1 1.1

1.5”

1.5 1.1 0.9

1.5”

1.8 1.2 1.1

2”

1.5 1.1 0.9

2”

2.0 1.4 1.2

2.5”

1.8 1.1 1.1

2.5”

2.1 1.4 1.2

3” 4” 6” 8”

1.8 1.1 1.1

3” 4” 6” 8”

2.3 1.5 1.4

2.0 1.4 1.2

2.7 1.8 1.5

2.3 1.5 1.4

2.9

2.0

1.7

2.4

1.5

1.4

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 5

Industrial Grey PVC-U Pipe And Fittings

PVC-U Elbow 90°  Sizes 14”, 16” available on request

PVC-U Elbow Alternative Angle Options  Non stock items. 60º & 11.25º available on request

SIZE 1/4’’ 3/8” 1/2” 3/4”

CODE

SIZE 1/2”

30 Deg 22.5 Deg

15 Deg

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

806 002 806 003 806 005 806 007 806 010 806 012 806 015 806 020 806 025 806 030 806 040 806 060 806 080 806 100 806 120

815 005F

816 005

818 005F

3/4”

815 007F

816 007

818 007F

1”

815 010F

816 010

818 010F

1.25”

815 012F

816 012

818 012F

1”

1.5”

815 015F

816 015

818 015F

1.25”

2”

815 020F

816 020

818 020F

1.5”

3”

815 030F

816 030

818 030F

2”

4”

815 040F

816 040

818 040F

2.5”

3” 4” 6” 8”

6”

815 060F 816 060F

818 060F

8”

815 080F 816 080F

818 080F

 F= Fabricated from SCH80 Pipe

10” 12”

PVC-U Bend 90° Long Radius

PVC-U Threaded Elbow 90°  Female Thread x Female Thread

SIZE

CODE

SIZE 1/4” 3/8” 1/2” 3/4”

CODE (BSP-F)

CODE (NPT-F)

N/A

808 002 808 003 808 005 808 007 808 010 808 012 808 015 808 020 808 025 808 030 808 040

1/2” 3/4”

15 15 15 15 15 15 15 15 15

721 001 106 721 001 107 721 001 108 721 001 109 721 001 110 721 001 111 721 001 113 721 001 115 721 001 117

721 101 605 721 101 606 721 101 607 721 101 608 721 101 609 721 101 610 721 101 611

1”

1.25”

1”

1.5”

1.25”

2” 3” 4” 6”

1.5”

2”

2.5”

N/A N/A N/A

3” 4”

PVC-U Elbow 45°

PVC-U Threaded Adaptor Elbow 90°

 Socket x Female Thread  BSP-F version has reinforced stainless band

 Sizes 14”, 16” available on request

SIZE 1/4” 3/8” 1/2” 3/4”

CODE

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

817 002 817 003 817 005 817 007 817 010 817 012 817 015 817 020 817 025 817 030 817 040 817 060 817 080 817 100 817 120

SIZE 1/2” 3/4”

CODE (BSP-F) 721 101 206 721 101 207 721 101 208

CODE (NPT-F)

807 005 807 007 807 010 807 012 807 015 807 020

1”

1.25”

N/A N/A N/A

1.25”

1.5”

2”

2.5”

3”

4” 6” 8”

10” 12”

6 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

PVC-U Tee 90°  Sizes 14”, 16” available on request

PVC-U Threaded Adaptor Tee 90°

 Socket x Female Thread  BSP-F adaptors are reinforced with a stainless band

SIZE 1/4’’

CODE

SCH80

801 002 801 003 801 005 801 007 801 010 801 012 801 015 801 020 801 025 801 030 801 040 801 060 801 080 801 100 801 120

3/8” SCH80 1/2” SCH80 3/4” SCH80

SIZE CODE (BSP-F) 3/8” 721 201 205 1/2” 721 201 206 3/4” 721 201 207 1” 721 201 208

CODE (NPT-F)

N/A

802 005 802 007 802 010

1” SCH80

1.25” SCH80 1.5” SCH80

1.25”

N/A N/A N/A

N/A

2” SCH80

1.5”

802 015 802 020

2.5” SCH80

2”

3” SCH80

4” SCH80 6” SCH80 8” SCH80 10” SCH80 12” SCH80

PVC-U Reducing Tee 90°

PVC-U Threaded Tee 90°  Female Thread x Female Thread

 Sizes 10”, 12” available on request

SIZE CODE (BSP F)

CODE (NPT-F)

SIZE

CODE

1/4”

N/A

805 002 805 003 805 005 805 007 805 010 805 012 805 015 805 020 805 025 805 030 805 040

3/4” x 1/2”

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

801 101 801 130 801 131 801 168 801 209 801 210 801 211 801 247 801 248 801 249 801 251 801 292 801 338 801 420 801 422 801 532 801 585

3/8” 721 201 605 1/2” 721 201 606 3/4” 721 201 607 1” 721 201 608 1.25” 721 201 609 1.5” 721 201 610

1” x 1/2” 1” x 3/4”

1.25” x 1” 1.5” x 1/2” 1.5” x 3/4”

1.5” x 1” 2” x 1/2” 2” x 3/4”

2” 721 201 611

2.5”

N/A N/A N/A

3” 4”

2” x 1”

2” x 1.5” 2.5” x 2”

3” x 2” 4” x 2” 4” x 3” 6” x 4” 8” x 6”

PVC-U Cross  Sizes 10”, 12”, 14”, 16” available on request

SIZE 1/4’’ 3/8’’ 1/2’’ 3/4”

CODE

PVC-U Tee 45°

SCH80

820 002

N/A

SIZE 1/2” 3/4”

CODE

SCH80

820 005

9 9 9 9 9 9 6 6

721 251 106 721 251 107 721 251 108 721 251 109 721 251 110 721 251 111 721 251 113 721 251 115

12 12 12 12 12

721 301 107 721 301 108 721 301 109 721 301 110 721 301 111

1”

1.25”

1.5”

2”

2” 3” 4” 6” 8’’

2.5”

SCH80 SCH80 SCH80 SCH80 SCH80

820 025 820 030

3”

4” 6” 8”

820 040

SCH80 SCH80

875 060 875 080

820 060F 820 080F

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 7

Industrial Grey PVC-U Pipe And Fittings

PVC-U Female Threaded Socket  Female Thread x Female Thread

PVC-U Socket

 Sizes , 14”, 16” available on request

SIZE

CODE

SIZE CODE (BSP-F)

CODE (NPT-F)

1/4” 3/8” 1/2” 3/4”

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

829 002 829 003 829 005 829 007 829 010 829 012 829 015 829 020 829 025 829 030 829 040 829 060 829 080 829 100 829 120

1/4” 3/8” 1/2” 3/4”

N/A

830 002 830 003 830 005 830 007 830 010 830 012 830 015 830 020 830 030 830 040

721 910 605 721 910 606 721 910 607 721 910 608 721 910 609 721 910 610 721 910 611

1”

1.25”

1.5”

2”

2” 3” 4”

2.5”

N/A N/A

3”

4” 6” 8”

10” 12”

PVC-U Reducing Socket

PVC-U Female Threaded Adaptor Socket  Socket x Female Thread  BSP-F adaptors are reinforced with a stainless band

 Sizes , 10”,12”, 14”, 16” available on request

SIZE

CODE

3/4” x 1/2” SCH80 1” x 1/2” SCH80 1” x 3/4” SCH80 1.25 x 1” SCH80 1.5” x 1” SCH80 1.5” x 1.25” SCH80

829 101 829 130 829 131 829 168 829 211 829 212 829 249 829 250 829 251 829 291 829 338 829 422 829 532 829 585

SIZE CODE (BSP-F)

CODE (NPT-F)

1/4” 3/8” 1/2” 3/4”

N/A

835 002 835 003 835 005 835 007 835 010 835 012 835 015 835 020 835 025 835 030 835 040

721 911 005 721 911 006 721 911 007 721 911 008 721 911 009 721 911 010 721 911 011

2” x 1” SCH80

1”

2” x 1.25” SCH80

1.25”

2” x 1.5” SCH80 2.5” x 1.5” SCH80

1.5”

2”

3” x 2” SCH80 4” x 3” SCH80 6” x 4” SCH80 8” x 6” SCH80

2.5”

N/A

3”

721 916 013

4” 721 916 014M

PVC-U Female Threaded Adaptor Spigot

PVC-U Adaptor Socket Metric - Imperial  For joining Metric to Imperial pipe sizes

 Spigot x BSP-Female Thread

SIZE PN

CODE

METRIC IMPERIAL d16 mm x DN10 mm 3/8” d20 mm x DN15 mm 1/2” d25 mm x DN20 mm 3/4” d32 mm x DN25 mm 1” d40 mm x DN32 mm 1.25” d50 mm x DN40 mm 1.5” d63 mm x DN50 mm 2” d90 mm x DN80 mm 3” d110 mm x DN100 mm 4”

SIZE 1/2” 3/4”

PN 15 15 15 15 15 15

CODE

16 721 913 105 16 721 913 106 16 721 913 107 16 721 913 108 16 721 913 109 16 721 913 110 16 721 913 111 16 721 913 113 16 721 913 115

721 901 406 721 901 407 721 901 408 721 901 409 721 901 410 721 901 411

1”

1.25”

1.5”

2”

8 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

Male Threaded Adaptor Socket  Socket x Male Thread

PVC-U Cap  Sizes 12”, 14”, 16” available on request

SIZE

CODE

SIZE CODE (BSP-M)

CODE (NPT-M)

1/4’’ 3/8” 1/2” 3/4”

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

847 002 847 003 847 005 847 007 847 010 847 012 847 015 847 020 847 025 847 030 847 040 847 060 847 080 847 100

3/8” 1/2” 3/4”

721 911 705 721 911 706 721 911 707 721 911 708 721 911 709 721 911 710 721 911 711

N/A

836 005 836 007 836 010 836 012 836 015 836 020 836 030

1”

1.25”

1.5”

2” 3”

2”

336-030G

2.5”

4”

336-040G

836 040

3”

4” 6” 8”

10’’

PVC-U Threaded Cap

PVC-U Male Toe Nipple  Spigot x BSP-Male Thread

SIZE 1/4” 3/8” 1/2” 3/4”

CODE

SIZE 1/4”

CODE (BSP)

CODE (NPT)

721 913 904 721 913 905 721 913 906 721 913 907 721 913 908 721 913 909 721 913 910 721 913 911 721 913 912 721 913 913 721 913 915

N/A

848 002 848 003 848 005 848 007 848 010 848 012 848 015 848 020 848 030 848 040

9 9 9 9 9 9 9 9 9 9

3/8” 721 960 605 1/2” 721 960 606 3/4” 721 960 607 1” 721 960 608 1.25” 721 960 609 1.5” 721 960 610

1”

1.25”

1.5”

2”

2” 721 960 611

2.5”

3” 4”

N/A N/A

3” 4”

PVC-U Hex Nipple BSP-M  BSP-Male x BSP-Male Thread

PVC-U Plug (Male Thread)

 Taper Male Thread

SIZE 1/4” 3/8” 1/2” 3/4”

PN 10 10 10 10 10 10 10 10

CODE

SIZE CODE (BSP-M)

CODE (NPT-M)

880 005

1/4” 3/8” 1/2” 3/4”

N/A

850 002 850 003 850 005 850 007 850 010 850 012 850 015 850 020 850 030 850 040 850 060

721 911 905 721 911 906 721 911 907 721 911 908 721 911 909 721 911 910 721 911 911

721 961 905 721 961 906 721 961 907 721 961 908 721 961 909 721 961 910 721 961 911

1”

1.25”

1.5”

2”

2” 3” 4” 6”

N/A N/A N/A

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 9

Industrial Grey PVC-U Pipe And Fittings

Reducing Bush  Spigot x Socket  Sizes 14”, 16” available on request

Threaded Reducing Bush NPT-F

 Spigot x NPT-Female Thread  BSP-F Tapping for 1/2”, 3/4” & 1”available on request

SIZE

CODE

SIZE

CODE

3/8’’ X 1/4’’ 1/2’’ X 1/4’’ 1/2” x 3/8” 3/4” x 1/2”

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

837 052 837 072 837 073 837 101 837 130 837 131 837 166 837 167 837 168 837 209 837 210 837 211 837 212 837 247 837 248 837 249 837 250 837 251 837 291 837 292 837 335 837 337 837 338 837 339 837 420 837 422 837 490 837 530 837 532 837 534 837 585 837 628 837 670

3/8” x 1/4” 1/2” x 1/4” 1/2” x 3/8” 3/4” x 1/4” 3/4” x 1/2”

SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80 SCH80

838 052 838 072 838 073 838 098 838 101 838 130 838 131 838 166 838 167 838 168 838 209 838 210 838 211 838 212 838 247 838 248 838 249 838 250 838 251 838 291 838 292 838 338 838 339 838 420 838 422

1” x 1/2” 1” x 3/4”

1.25” x 1/2” 1.25” x 3/4”

1.25 x 1”

1.5” x 1/2” 1.5” x 3/4”

1.25 x 1”

1.5” x 1/2” 1.5” x 3/4”

1.5” x 1”

1.5” x 1.25”

1.5” x 1”

2” x 1/2” 2” x 3/4”

1.5” x 1.25”

2” x 1/2” 2” x 3/4”

2” x 1”

2” x 1.25”

2” x 1”

2” x 1.5”

2” x 1.25”

2.5” x 1.5”

2” x 1.5”

2.5” x 2”

2.5” x 1.5”

3” x 1”

2.5” x 2”

3” x 1.5”

3” x 2”

3” x 2.5”

4” x 2” 4” x 3”

4” x 2” 4” x 3” 5” x 4” 6” x 3” 6” x 4” 6” x 5” 8” x 6”

PVC-U M x F Threaded Adaptor Reducer

SIZE CODE (BSP)

CODE (NPT)

3/8” x 1/4” 1/2” x 1/4”

N/A N/A

839 052 839 072 839 073 839 098 839 101 839 130 839 131 839 166 839 167 839 168 839 210 839 211 839 212 839 247 839 248 839 249 839 250 839 251 839 338 839 420 839 422

1/2” x 3/8” 721 910 834

10” x 8” 12” X 10”

3/4” x 1/4”

N/A

3/4” x 1/2” 721 910 837 1” x 1/2” 721 910 842 1” x 3/4” 721 910 841

Threaded Reducing Bush BSP-F

1.25” x 1/2” 1.25” x 3/4”

N/A N/A

 Spigot x BSP-F ( use only with plastic threads)

SIZE

PN 15

CODE

1.25 x 1” 721 910 846

1” x 3/4”

721 901 541

1.5” x 3/4”

N/A N/A

1.5” x 1”

1.5” x 1.25” 721 910 852

Reducing Hex Nipple BSP-M X BSP-M

2” x 1/2” 2” x 3/4”

N/A N/A

2” x 1”

2291

2” x 1.25”

N/A

SIZE

CODE

2” x 1.5” 721 910 858

1” x 1/2” 1” x 3/4”

02 307 02 306

3” x 2” 4” x 2” 4” x 3”

N/A N/A N/A

10 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

PVC-U Saddles  Single Off-Take Stainless Steel Bolts  Branch is solvent cement socket

PVC-U Tank Adaptor

 Socket connection

SIZE Diameter Hole in Tank

EPDM

FPM

SIZE

CODE

1/2” 3/4”

35 43 49 61 67 83

161 050 226 161 050 226V 161 050 227 161 050 227V 161 050 228 161 050 228V 161 050 229 161 050 229V 161 050 230 161 050 230V 161 050 231 161 050 231V 8170E-030 8170V-030 8170E-040 8170V-040 8170E-060 8170V-060 8170E-080 8170V-080

2” x 1/2” 2” x 3/4”

866S 247 866S 248 866S 249 866S 250 866S 251 866S 291 866S 334 866S 335 866S 338 866S 417 866S 419 866S 420 866S 422 866S 525 866S 528 866S 530 866S 532 866S 575 866S 582 866S 585

1”

2” x 1”

1.25”

2” x 1.25”

1.5”

2” x 1.5”

2”

2.5” x 1.5”

3” 115 4” 139

3” x 3/4”

3” x 1”

6”

3” x 2” 4” x 1”

8” 260

4” x 1.5”

4” x 2” 4” x 3” 6” x 1” 6” x 2” 6” x 3” 6” x 4” 8” x 1” 8” x 4” 8” x 6”

PVC-U Expansion Bellows (EPDM)

 Max pressure 10 bar

SIZE

EPDM

3/4”

EJ22 007

1”

EJ22 010

1.25”

EJ22 012

1.5”

EJ22 015

2”

EJ22 020

2.5”

EJ22 025

3”

EJ22 030

PVC-U Expansion Joints

 Expansion Joint 6” Travel (Socket x Socket)  Expansion Joint 12” Travel (available on request)  Designed to be installed as a pair

SIZE 1/2” 3/4”

EPDM

FPM

826 005X6 826 007X6 826 010X6 826 012X6 826 015X6 826 020X6 826 025X6 826 030X6 826 040X6 826 060X6 826 080X6

826V 005X6 826V 007X6 826V 010X6 826V 012X6 826V 015X6 826V 020X6 826V 025X6 826V 030X6 826V 040X6 826V 060X6 826V 080X6

1”

1.25”

1.5”

2”

2.5”

3”

4” 6” 8”

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 11

Industrial Grey PVC-U Pipe And Fittings

PVC-U Hose Connectors

PVC-U Hose Connector (BSP-M Thread)

 BSP-Male x Hose connection

SIZE

CODE

BSP-M THREAD SUITS HOSE ID 1/4”

12 mm 10 16 mm 10 20 mm 10 25 mm 10

721 960 704 721 960 705 721 960 706 721 960 707

3/8” 1/2” 3/4”

1” 1”

25 mm

090 31

30 mm 10 40 mm 10

721 960 708 721 960 709

1.25”

1.5” 1.5”

40 mm 50 mm

090 32 022 23

PVC-U Hose Connector (NPT-M Thread)

 NPT-Male x Hose connection

SIZE

CODE

NPT-M

SUITS HOSE ID

1/2” 3/4”

16 mm 10 20 mm 10 25 mm 10

1436 005 1436 007 1436 010

1”

PVC-U Hose Connector (Spigot Connection)

SIZE

CODE

Spigot

Hose Barb

1/2” 3/4”

16 mm SCH 40 20 mm SCH 40 25 mm SCH 40

460-005G 460-007G 460-010G

1”

12 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

PVC-U Braided Hose & Clamps

PVC-U Braided Hose

SIZE WORKING PRESSURE

MIN BURST HOSE 1M LENGTH HOSE 20M COIL

HOSE100M COIL

HOSE ID HOSE OD

Bar Pressure @ 23oc

12.5

18.1

6.4 MPa n/a

HOSE-MP-12-020 HOSE-MP-12-100

- HOSE-PVC-16-1 HOSE-PVC-16-20 HOSE-PVC-16-100

- HOSE-PVC-20-1 HOSE-PVC-20-20 HOSE-PVC-20-100

- n/a

HOSE-MP-25-20 HOSE-MP-25-100

41.8

4.0 MPa n/a

HOSE-MP-32-020 HOSE-MP-32-100

52.4

8.9

3.6 MPa n/a

HOSE-MP-40-020 HOSE-MP-40-100

8.9

3.6 MPa n/a

HOSE-MP-50-020 HOSE-MP-50-100

Stainless Steel Hose Clamp

SUITS HOSE SIZE S/S CLAMP

HOSE ID HOSE OD 12.5

18.1 HOSE-CP-17-19

22.4 HOSE-CP-20-22

27.6 HOSE-CP-26-28

33 HOSE-CP-30-33

41.8 HOSE-CP-40-43

52.4 HOSE-CP-50-53

62 HOSE-CP-60-63

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 13

Industrial Grey PVC-U Pipe And Fittings

PVC-U Union BS (British Style)

 BSP-F Union End x BSP-F Bush PVC-U Union BS (BSP-F)

 Socket Union End x Socket Bush PVC-U Union BS (Socket)

SIZE 3/8” 1/2” 3/4”

EPDM

FPM

SIZE 3/8” 1/2” 3/4”

EPDM

15 721 511 105 721 511 130 15 721 511 106 721 511 131 15 721 511 107 721 511 132 15 721 511 108 721 511 133 15 721 511 109 721 511 134 15 721 511 110 721 511 135 15 721 511 111 721 511 136

10 721 510 605 10 721 510 606 10 721 510 607 10 721 510 608 10 721 510 609 10 721 510 610 10 721 510 611

1”

1.25”

1.5”

2”

 Socket Union End x BSP-F Bush PVC-U Union BS (Socket x BSP-F)

 Metric Socket End x BS Socket Bush PVC-U Union BS (Metric x Imperial)

SIZE 3/8” 1/2” 3/4”

EPDM

Metric Socket

Imperial Bush

EPDM

10 721 511 205 10 721 511 206 10 721 511 207 10 721 511 208 10 721 511 209 10 721 511 210 10 721 511 211

d16 d20 d25 d32

3/8” 1/2” 3/4”

15 721 513 105 15 721 513 106 15 721 513 107 15 721 513 108 15 721 513 109 15 721 513 110 15 721 513 111

1”

1.25”

d40 1.25”

1.5”

d50 d63

1.5”

2” 3” 4”

2”

10 10

Z-07808 Z-07809

PVC-U Union BS Spare parts: Union End

PVC-U Union BS Spare parts: Union Nut

SIZE

UNION END SOLVENT BSP-F Thread NPT-F Thread

SIZE

UNION NUT

3/8” 721 601 105 721 600 655 721 602 655 1/2” 721 601 106 721 600 656 721 602 656 3/4” 721 601 107 721 600 657 721 602 657 1” 721 601 108 721 600 658 721 602 658 1.25” 721 601 109 721 600 659 721 602 659 1.5” 721 601 110 721 600 660 721 602 660 2” 721 601 111 721 600 661 721 602 661

3/8” 721 890 005 1/2” 721 890 006 3/4” 721 890 007 1” 721 890 008 1.25” 721 890 009 1.5” 721 890 010 2” 721 890 011

PVC-U Union BS Spare parts: Union Bush

PVC-U Union BS Spare parts: O-Ring

SIZE

UNION BUSH

SIZE

O-RING

SOLVENT BSP-F 3/8” 721 841 105 721 840 605 1/2” 721 841 106 721 840 606 3/4” 721 841 107 721 840 607 1” 721 841 108 721 840 608 1.25” 721 841 109 721 840 609 1.5” 721 841 110 721 840 610 2” 721 841 111 721 840 611

EPDM FPM 3/8” 748 410 005 749 410 005 1/2” 748 410 006 749 410 006 3/4” 748 410 007 749 410 007 1” 748 410 008 749 410 008 1.25” 748 410 009 749 410 009 1.5” 748 410 010 749 410 010 2” 748 410 011 749 410 011

14 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

PVC-U Union (SCH80 Style)

PVC-U Union (SCH80 Style)  Socket Union End x Socket Bush

 Union Bush and Union Nuts are not available as spare components

SIZE 1/4’’

EPDM

FPM

SCH80

897 002

857 002

3/8” SCH80 857 003 1/2” SCH80 897 375 005 857 375 005 3/4” SCH80 897 375 007 857 375 007 1” SCH80 897 375 010 857 375 010 1.25” SCH80 897 375 012 857 375 012 1.5” SCH80 897 375 015 857 375 015 2” SCH80 897 375 020 857 375 020 2.5” SCH80 897 025P 857 025P 3” SCH80 897 030 857 030 4” SCH80 897 040 857 040 897 003

PVC-U Union SCH80 Spare parts: Union End  Sizes 1/4’’ , 2.5’’ , 3” & 4” - no union ends available

SIZE

UNION END

SOLVENT BSP-F 3/8” 3VC LV1 L16 3VC LV1 F16 1/2” 3VC LV1 L20 3VC LV1 F20 3/4” 3VC LV1 L25 3VC LV1 F25 1” 3VC LV1 L32 3VC LV1 F32 1.25” 3VC LV1 L40 3VC LV1 F40 1.5” 3VC LV1 L50 3VC LV1 F50 2” 3VC LV1 L63 3VC LV1 F63

PVC-U Union SCH80 Spare parts: O-Ring

SIZE

O-ring EPDM

FPM

1/4’’ 3/8” 1/2” 3/4”

897 002-E RING 897 003-E RING

897 002-V RING 897 003-V RING

897 375 005-E RING 897 375 007-E RING 897 375 010-E RING 897 375 012-E RING 897 375 015-E RING 897 375 020-E RING

897 375 005-V RING 897 375 007-V RING 897 375 010-V RING 897 375 012-V RING 897 375 015-V RING 897 375 020-V RING

1”

1.25”

1.5”

2”

2.5”

897025-E RING 897 030-E RING 897 040-E RING

897025-V RING 897 030- V RING 897 040- V RING

3” 4”

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 15

Industrial Grey PVC-U Pipe And Fittings

PVC Flange Adaptors

Flange Material Selection - based on drilling pattern required

AS4087/TABLE D

TABLE E

ANSI 150

DIN 10

PVC-U Vanstone Flange

Size 2”, 3”,4” ,6”,8”

YES

PVC-U Stub & Galvanised or Stainless Ring

YES

PVC-U Stub & PP-V Ring PVC-U Stub & PP-Steel Ring

YES

PVC-U Vanstone Flanges

Bolt Kit to Suit Vanstone flange

 Solvent connection, Spigot Flanges available on request  Spigot Flanges Type 856 are available on request  Metal Ring Required to increase PN Rating to 16 bar

 Contains: 316 Stainless Steel Hex head bolts, nuts and washers.  Bolt sizes allow jointing of two vanstone flanges with a 3mm thick gasket

SIZE 1/2” 3/4”

ANSI 150 TABLE D/E

SIZE

ANSI 150 TABLE D/E

PN10 PN10 PN10 PN10 PN10 PN10 PN10 PN10 PN10 PN10 PN10 PN10 PN10

854 005 854 007 854 010 854 012 854 015

1/2” BOLTKIT-VS-1 3/4” BOLTKIT-VS-1 1” BOLTKIT-VS-2

1”

1.25”

1.25” BOLTKIT-VS-2 1.5” BOLTKIT-VS-3 2” BOLTKIT-VS-4 BOLTKIT-VS-4 2.5” BOLTKIT-VS-5 3” BOLTKIT-VS-5 BOLTKIT-VS-6 4” BOLTKIT-VS-7 BOLTKIT-VS-7 6” BOLTKIT-VS-8 BOLTKIT-VS-8 8” BOLTKIT-VS-8 BOLTKIT-VS-8

1.5”

2”

M854 020

2.5”

854 025

3”

854 030 854 030DE

4” 6” 8”

854 040 854 040DE

M854 060 M854 080

10” 12” 14” 16”

854 100 854 120 854 140 854 160

PVC-U Stub Flange  Stub flange only, backing ring required for installation

SIZE 1/2” 3/4”

PN 15 15 15 15 15 15 15 15

CODE

721 791 106 721 791 107 721 791 108 721 791 109 721 791 110 721 791 111 721 791 113 721 791 115 721 791 117 721 791 120 721 791 122 721 791 123

1”

1.25”

1.5”

2” 3” 4” 6” 8”

9 9 9

10” 12”

16 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

Plastic Backing Rings to suit PVC Stub Flanges

 Modern full plastic flange PP-GF (30% glass-fibre reinforced) PP-V Backing Ring to suit PVC Stub

PP-Steel Coated Backing Ring to suit PVC Stub

 PP-GF (30% glass-fibre reinforced) with steel ring

SIZE 1/2” 3/4”

ANSI 150

DIN

SIZE DIN 1/2” 727 701 406 727 700 406 3/4” 727 701 407 727 700 407 1” 727 701 408 727 700 408 1.25” 727 701 409 727 700 409 1.5” 727 701 410 727 700 410 2” 727 701 411 727 700 411 3” 727 701 413 727 700 413 4” 200 050 086 PPV-040-DIN 6” 200 050 081 PPV-060-DIN 8” 727 700 420 727 700 420 10” 727 701 422 727 700 422 12’’ 727 701 423 727 700 423 ANSI 150

727 701 206 727 701 207 727 701 208

727 700 206 727 700 207 727 700 208 727 700 209 727 700 210 727 700 211 727 700 213

1”

1.25” 727 701 209C

1.5” 727 701 210C 2” 727 701 211C 3” 727 701 213C

4”

200 050 032 PPSTEEL-040-DIN

6” 8”

200 050 031 PPSTEEL-060-DIN

727 701 220

727 700 220 727 700 222 727 700 223

10” 12”

N/A N/A

Metal Backing Rings to suit PVC Stub Flanges

 Alternative drilling patterns available on request * Reduced thickness Table D rings available on request. PCD of AS4087 & Table D are the same. Metal Backing Ring to suit PVC Stub

GALVANISED

STAINLESS STEEL

SIZE 1/2” 3/4”

TABLE E

AS 4087

ANSI 150

DIN

TABLE E

AS 4087

ANSI 150

DIN

G005-TE-28 G007-TE-34 G010-TE-42 G012-TE-51

G005-TE-28 G005-AN-28 G007-TE-34 G007-AN-34 G010-TE-42 G010-AN-42 G012-TE-51 G012-AN-51

G005-DI-28 G007-DI-34 G010-DI-42 G012-DI-51

S005-TE-28 S007-TE-34 S010-TE-42 S012-TE-51

S005-AN-28 S007-AN-34 S010-AN-42 S012-AN-51

S005-DI-28 S007-DI-34 S010-DI-42 S012-DI-51

1”

1.25”

1.5”

G015-TE-62

G015-TE-62 G015-AN-62

G015-DI-62

S015-TE-62

S015-AN-62

S015-DI-62

2” G020-4087-78 S020-DI-78 3” G030-4087-110 G030-4087-110 G030-AN-110 G030-DI-110 S030-4087-110 S030-4087-110 S030-AN-110 S030-DI-110 4” G040-TE-140 G040-4087-140 G040-AN-140 G040-DI-140 S040-TE-140 S040-4087-140 S040-AN-140 S040-DI-140 6” G060-TE-200 G060-4087-200 G060-AN-200 G060-DI-200 S060-TE-200 S060-4087-200 S060-AN-200 S060-DI-200 8” G080-TE-254 * G080-4087-254 G080-AN-254 G080-DI-254 S080-TE-254 * S080-4087-254 S080-AN-254 S080-DI-254 10” G100-TE-310 * G100-4087-310 G100-AN-310 G100-DI-310 S100-TE-310 * S100-4087-310 S100-AN-310 S100-DI-310 12” G120-TE-348 * G120-4087-348 G120-AN-348 G120-DI-348 S120-TE-348 * S120-4087-348 S120-AN-348 S120-DI-348 G020-4087-78 G020-AN-78 G020-DI-78 S020-4087-78 S020-4087-78 S020-AN-78

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 17

Industrial Grey PVC-U Pipe And Fittings

PVC-U Blind Flanges

PVC-U Blind Flange (ANSI 150 Drilling)  Moulded

PVC-U Blind Flange (Fabricated from PVC Grey Sheet)

 Fabricated, alternative drilling patterns available on request

SIZE 1/2” 3/4”

ANSI 150 853 005 853 007 853 010 853 012 853 015 853 020 853 025 853 030 853 040 853 060 853 080

SIZE 1/2” 3/4”

ANSI 150 853 005F 853 007F 853 010F 853 012F 853 015F 853 020F 853 025F 853 030F

Table D/E

853 005F-DE 853 007F-DE 853 010F-DE 853 012F-DE 853 015F-DE 853 020F-DE 853 025F-DE 853 030F-DE 853 040F-D 853 040F-E 853 060F-DE 853 080F-DE 853 100F-DE 853 120F-DE

1”

1.25”

1.5”

2”

2.5”

3”

4” 6” 8”

4” 4” 6” 8”

853 040F

853 060F 853 080F 853 100F 853 120F

10” 12”

Full Face Gaskets

Full Face Gaskets 3MM THICK

 Please add drilling pattern to end of code when ordering: TE = Table E , TD = Table D, AN = ANSI, DI = DIN

SIZE 1/2” 3/4”

EPDM

FPM ( VITON)

PTFE

GKT EPDM 005-** GKT EPDM 007-** GKT EPDM 010-** GKT EPDM 012-** GKT EPDM 015-** GKT EPDM 020-** GKT EPDM 025-** GKT EPDM 030-** GKT EPDM 040-** GKT EPDM 060-** GKT EPDM 080-** GKT EPDM 100-** GKT EPDM 120-**

GKT FPM 005-** GKT FPM 007-** GKT FPM 010-** GKT FPM 012-** GKT FPM 015-** GKT FPM 020-** GKT FPM 025-** GKT FPM 030-** GKT FPM 040-** GKT FPM 060-** GKT FPM 080-** GKT FPM 100-** GKT FPM 120-**

GKT PTFE 005-** GKT PTFE 007-** GKT PTFE 010-** GKT PTFE 012-** GKT PTFE 015-** GKT PTFE 020-** GKT PTFE 025-** GKT PTFE 030-** GKT PTFE 040-** GKT PTFE 060-** GKT PTFE 080-** GKT PTFE 100-** GKT PTFE 120-**

1”

1.25”

1.5”

2”

2.5”

3”

4” 6” 8”

10” 12”

18 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings

Flange Guard (Safety Shield) ANSI 150

 UV stabilised , resistant to sunlight rain & fumes  Available in PVC and PTFE materials

SIZE 1/2” 3/4”

PVC

PTFE

V005 150

TP005 150

V0075 150

TP0075 150

1”

V01 150

TP01 150

1-1/2”

V015 150 V02 150 V03 150

TP015 150 TP02 150 TP03 150

2” 3”

4” 6” 8”

V04 150 V06 150 V08 150

TP04 150 TP06 150 TP08 150

Operational Information: Flange Safety Shield

Flange Guard (Flange Safety Shield) incorporates a leak indication patch, which changes colour. Special sealed integral weep holes are located to immediately indicate a leak. The patch changes to red in the presence of Acid’s and green in presence of Alkali.

The indicator patch is replaceable making the flange guard re-usable.

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 19

Industrial Grey PVC-U Pipe And Fittings Valves

PVC-U Ball Valve 546 Pro ( Georg Fischer)

• Double Union • PTFE Seat • Automation Available

• Lockable Handle standard on 3/8” to 2” (shackle size 4mm) • Padlock Adaptor option to increase to 7mm shackle size (198 546 099) • ASTM Valve Ends

PVC-U Ball Valve Type 546 Pro

 Requires 20mm pipe to extend per m code 8008 007M  No locking option available 546 Pro Accessories - Handle Extension

 Standard Handle / with mounting inserts

SIZE PN 3/8” 16 1/2” 16 3/4” 16

EPDM

FPM

161 546 341 161 546 342 161 546 343 161 546 344 161 546 345 161 546 346 161 546 347 161 546 348 161 546 349

161 546 351 161 546 352 161 546 353 161 546 354 161 546 355 161 546 356 161 546 357 161 546 358 161 546 359

SIZE

Handle

3/8” - 1/2’’

161 486 443

1” 16

3/4” - 1’’ 1.25” - 1.5”

161 486 444 161 486 445 161 486 446

1.25” 16 1.5” 16

2”

2” 16

2.5” 16

3” 16

4” 16

161 546 350

161 546 360

546 Pro Accessories - Valve End Options  Alternative valve ends to suit ball valve

SIZE

PVC-U Valve Nut

PVC-U Socket End ASTM

PVC-U Threaded End NPT-F 161 490 723 161 490 724 161 490 725 161 490 726 161 490 727 161 490 728 161 490 729 161 490 730 161 490 731

PVC-U Threaded End BSP-F 161 490 690 161 490 691 161 490 692 161 490 693 161 490 694 161 490 695 161 490 696 161 490 697 161 490 698

3/8”

161 490 538

161 490 712

1/2” 3/4”

161 490 538 161 490 539 161 490 540 161 490 541 161 490 542 161 490 543 161 490 544 161 490 545

161 490 713 161 490 714 161 490 715 161 490 716 161 490 717 161 490 718 161 490 719 161 490 720

1”

1.25”

1.5”

2”

2.5”

3”

4”

161 490 546

161 490 721

161 490 732

161 490 699

546 Pro Accessories - Valve Labels

 Printable labels to suit 546 Ball Valve

SIZE

LEVER CLIPS

PACK QTY

3/8” - 1/2”

198 807 221 198 807 222 198 807 223 198 807 224

10 PC 10 PC

3/4”- 1”

1.25” - 1.5”

5 PC 5 PC

2”

SIZE

PRINTED SHEETS

QTY

3/8” - 1/2”

198 807 231-SHEET 198 807 232-SHEET 198 807 233-SHEET 198 807 234-SHEET

1 SHEET OF 48 LABELS 1 SHEET OF 24 LABELS 1 SHEET OF 18 LABELS 1 SHEET OF 11 LABELS

3/4”- 1”

1.25” - 1.5”

2”

20 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings Industrial Grey PVC-U Valve

Type 546 Pro Ball Valve Limit Switches

546 Pro Accessories - Mechanical Limit Switch  Requires lockable handle for installation

SIZE Mechanical Limit Switches Ag Ni

Lockable Handle required for Mechanical switches

3/8” - 1/2”

167 482 626 167 482 627 167 482 627

167 484 100 167 484 101 167 484 102

3/4”

1”

1.25”

167 482 628 167 482 628

167 484 103 167 484 104

1.5”

2”

167 482 629

167 484 105

2.5”

167 482 630 167 482 630

161 486 689 161 486 690

3”

4”

167 482 631

161 486 691

546 Pro Accessories - Inductive Limit Switch ( Valve Size 3/8” - 2” )  Requires two components - Interface module and Double sensor  PNP Wiring: Positive Negative Postive

SIZE

Manual Interface Module 546 Pro

3/8” - 1/2”

198 546 102 198 546 103 198 546 104 198 546 105 198 546 106 198 546 107

3/4”

1”

1.25”

1.5”

2”

LED Signal colour

Double sensor code

Closed: Green / Open: Red Closed: Red / Open: Green

198 546 001 198 546 002

546 Pro Accessories - Inductive Limit Switch ( Valve Size 2.5” - 4” )  Requires two components - Inductive Limit Switch & Lockable Handle  PNP Wiring: Positive Negative Postive

SIZE

Inductive Limit Switch PNP

Lockable Handle required for Mechanical switches

2.5”

167 482 666 167 482 666

161 486 689 161 486 690

3”

4”

167 482 667

161 486 691

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 21

Industrial Grey PVC-U Pipe And Fittings Valves

PVC-U 3 Way Ball Valve Type 543 (Georg Fisher)

• Standard features of 546 valve • Suitable for actuation: • Pneumatic operation only 90 deg control available • Electric operation standard 90 deg control, can also be set for 180 deg control

PVC-U 3 Way Ball Valve ( L- Port)

PVC-U 3 Way Ball Valve ( T- Port)

SIZE PN 1/2” 10 3/4” 10

EPDM

FPM

SIZE PN 1/2” 10 3/4” 10

EPDM

FPM

161 543 062 161 543 063 161 543 064 161 543 065 161 543 066 161 543 067

161 543 072 161 543 073 161 543 074 161 543 075 161 543 076 161 543 077

161 543 262 161 543 263 161 543 264 161 543 265 161 543 266 161 543 267

161 543 272 161 543 273 161 543 274 161 543 275 161 543 276 161 543 277

1” 10

1.25” 10 1.5” 10

2” 10

PVC-U 3 Way Ball Valve (Spears)

PVC-U 3 Way Ball Valve ( L- Port)

PVC-U 3 Way Ball Valve ( T- Port)

SIZE PN

EPDM

FPM

SIZE PN

EPDM

FPM

2.5”

6 6

5022L1-025 5022L1-030

5032L1-025 5032L1-030

2.5”

6 5022T1-025 6 5022T1-030

5032T1-025 5032T1-030

3”

4”

5022L1-040

5032L1-040

4”

6 5022T1-040

5032T1-040

22 PAAS Source Book

www.paas.com.au

V 4.4

Industrial Grey PVC-U Pipe And Fittings Industrial Grey PVC-U Valve

3 Way Ball Valve Operation

3 Way Operation: T- Port

3 Way Operation: L- Port

 Distribution function in the starting position

 Distribution function

 Mixing function with reduced flow

 Outlet closed, passage open

 Distribution function

 Outlet closed, passage open with reduced flow

 Shut-off function

1300 PIPING (1300 747 464)

V 4.4

PAAS Source Book 23

Industrial Grey PVC-U Pipe And Fittings Valves

PVC-U Diaphragm Valve Type 514 ( Georg Fischer)

• Optimised weir offering higher flows than standard diaphragm arrangement • Linear control with new Weir design • Integrated lockable handle • Two coloured position indicator

PVC-U Diaphragm Valve Type 514

 Union connections

SIZE PN 1/2” 10

EPDM

FPM

PTFE

161 514 512

161 514 562 161 514 532

3/4” 10

161 514 513 161 514 514 161 514 515 161 514 516 161 514 517

161 514 563 161 514 533 161 514 564 161 514 534 161 514 565 161 514 535 161 514 566 161 514 536 161 514 567 161 514 537

1” 10

1.25” 10

1.5” 10

2” 10

PVC-U Diaphragm Valve Type 517 (Flanged ANSI)

PVC-U Diaphragm Valve Type 317 Flanged (ANSI)  Old Version please contact PAAS for Datasheet Information

 Sizes 3” ,4” & 6” are fixed flanged connections

SIZE 1/2” 3/4”

PN 10 10 10 10 10 10

EPDM

PTFE

SIZE

EPDM

PTFE

161 517 612 161 517 632 161 517 613 161 517 633 161 517 614 161 517 634 161 517 615 161 517 635 161 517 616 161 517 636 161 517 617 161 517 637

3” 4” 6”

10 161 317 024 161 317 039 10 161 317 025 161 317 040 7 161 317 027 161 317 042

1”

1.25”

1.5”

2”

514 Accessories - PVC-U valve ends, union nuts and o-rings  Valve ends, union nuts and O-rings

SIZE

Union End

Union Nut

O-ring

Solvent FPM 1/2” 721 601 106 721 600 656 721 890 006 748 410 006 749 410 006 3/4” 721 601 107 721 600 657 721 890 007 748 410 007 749 410 007 1” 721 601 108 721 600 658 721 890 008 748 410 008 749 410 008 1.25” 721 601 109 721 600 659 721 890 009 748 410 009 749 410 009 1.5” 721 601 110 721 600 660 721 890 010 748 410 010 749 410 010 2” 721 601 111 721 600 661 721 890 011 748 410 011 749 410 011 BSP-F EPDM

PVC-U e-DIASTAR - Electric Diaphragm

• Suit 1” and 2” Diaphragms • Retrofittable to manual diaphragm valve

• 24VDC and 240VAC Options • 4-20mA Positioner available

See page 38 for details

24 PAAS Source Book

www.paas.com.au

V 4.4

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200

Made with FlippingBook Annual report maker