SyncroFlo Split Case

THRUSTREAM - SPLIT CASE PUMPS

SyncroFlo has been manufacturing fire pumps for over 50 years with one of the widest range of approvals of any manufacturer in the world. Experience gained from extreme environments such as offshore oil & gas installations has led to the creation of the SyncroFlo FM/UL Thrustream range of fire pumps. The Thrust- ream range has been approved for fire protection by FM Approvals and Underwriter Laboratories. SyncroFlo Thrustream FM/UL Approved Fire Pumps are avail- able for duties ranging from 200 USgpm to 5000 USgpm and are suitable for electric or diesel drives. SyncroFlo also supplies Vertical, End-Suction and In-line pumps. SyncroFlo Thrustream FM/UL Approved Fire Pumps are available with either inch or metric fittings.

TYPICAL INSTALLATIONS: • Office buildings • Hospitals • Airports • Manufacturing facilities • Power stations • Pharmaceutical facilities • Schools/College TYPICAL APPLICATIONS:

• Sprinkler systems • Hydrant systems • Deluge systems • Monitor systems • Water curtain

FIRE - SPLIT CASE PUMPS

SyncroFlo, Inc.

2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com

FIRE PROTECTION - SPLIT CASE PUMPS

Split casing design eases the pump maintenance as removing top casing gives access to remove entire rotating assembly

Double suction impeller offers inherent axial thrust balance, low NPSHR and optimum efficiency

Stainless steel shaft sleeves and high strength compression packing option are available for applications involving high suction pressure

A true inline split case pump with suction and discharge flange centers inline

Split glands enables easy repacking

Direction of rotation change needs no additional parts and can easily be done at site

Modular design with plenty of interchangeability reduces spares inventory at site

Shaft sleeves are threaded on the high strength carbon steel pump shafts, locked in place with keys. (Most reliable design in market)

Impellers are specially designed to meet stringent requirements outlined within NFPA 20, UL:448 and FM:1311 for a fire pump

Design employs “Thru-Bore philosophy”which reduces shaft length supported between bearings and reduces shaft deflection at wear rings and stuffing box. Increases service life of wear parts

CONFIGURATION Horizontal, vertical open shaft, vertical direct mounted electric motor or horizontal engine driven

FEATURES • Axially split casing – rotating element can be removed without disturbing pipework • Exceptional hydraulic efficiencies • Double and single entry back to back impellers reduce end thrust, increase efficiency and bearing life • Modular design for maximum interchangeability (multiple impeller selections) • Stainless steel impellers and shaft as standard

• Internal high efficiency coating as standard • Cartridge mechanical seals as standard • Double row thrust bearing • Wide operating range and extended bearing life • Reduced efficiency degradation • Approved to FM and/or UL standards • In compliance with NFPA 20 • Used in pump as turbine applications

DISCHARGE & PERFORMANCE  • 5 in. to 24 in. • Outputs to 39,625 gpm • Heads up to 985 ft.

FIRE - SPLIT CASE PUMPS

Page 1 Page 2

Made with FlippingBook Annual report