CRACK. It will be helpful if you have an assistant help you hold the mirror in place when marking the locations of the holes. Use an awl or similar item to push into the holes and mark the wall for drilling. 5. INSTALL the proper anchor in the wall (not included). After drilling and installing the anchors in the wall, have an assistant hold the mirror in place once more and install the appropriate hardware for your wall. DO NOT OVER TIGHTEN; THE MIRROR WILL CRACK IF OVERTIGHTENED. 6. After the mirror has been hung you can remove the plastic or paper film. CLEANING: The mirror can be cleaned with vinegar & water solution & a very soft cloth.
Dimensions:
W: 36" x H: 72" Weight: 55 lb.
W: 24" x H: 72" Weight: 50 lb.
Safety Precautions - The safety of your clients is dependent on the appropriate choice of activity to match yet challenge their physical abilities. Use appropriate spotting / safety techniques. In addition, the layout of your activity area, proper installation and maintenance of your equipment is critical. TFH equipment is not intended for general recreational use. Under no condition should this equipment be used without proper supervision. This sheet is for example only. It is not meant to, in any way, replace local, State, or Federal standards. Be aware - it is your responsibility to find all pertinent safety information that pertains to your facility.
All TFH Products are to be used under adult supervision at all times.
TFH032020
Made with FlippingBook - professional solution for displaying marketing and sales documents online