* Repeat X4
8
9
7
Push in a small lock- nut to the plastic ‘ Nut Protector ’ as shown. *
Repeat step 6 until all four Thumb-wheels are attached to lower frame
Insert One U-Shaped Top Bar Handle into the left frame
* Repeat X2 for each side
11
12
10 .
Connect Left and Right frame sides by pushing the bolt through the second top hole and secure the bolt into to Nut with Protector.
Insert Long Bolts through upper and lower holes. Add a saddle washer, Top Hat Shaped Spacer then another saddle washer.
Tighten with the included key. Add End Finishing Caps to open holes, one each side
Made with FlippingBook - professional solution for displaying marketing and sales documents online