Geno's Garage Catalog

Available in Black color only.

Works great on the center console too.

Elbow Friend

STANDARD SIZE (8.5”L x 3W”) ELBOWFRIEND-STD: $21.99/pair

JUMB0 SIZE (10”L x 3W”)

ELBOWFRIEND-JMB: $29.99/pair Here is the problem: you have a truck with the same ‘ole hard plastic door panel and it’s uncomfortable as an arm rest. Here is the quick, easy and affordable answer: Elbow Friend. It is a comfortable pillow covered with durable fabric. We found the standard size to work well for most people, but a jumbo size is available too.

‘89-‘93 Grey 1G-ITK4PC-GY: $420.00 ‘91-‘93 Oxblood/Crimson Red

4 piece interior trim kit for 1st gen trucks Kit includes: (1) Upper Windshield Trim, (1) Upper Rear Window Trim, (1) Upper Driver Side Door Trim, (1) Upper Passenger Side Door Trim Mopar authentic restoration product.

1G-ITK4PC-OXB: $420.00 ‘88-‘90 Bordeaux Red 1G-ITK4PC-BOR: $420.00 ‘81-‘93 Black 1G-ITK4PC-BL: $420.00 ‘91-‘93 Spice Tan 1G-ITK4PC-TAN: $420.00

CENTER CONSOLE LID KIT (‘03-‘05) GRAY DRM924876: $323.95 TAUPE DRM924877: $215.00

Restore functionality of your Dodge Ram’s center console lid with a Center Console Kit. Includes all the materials and hardware needed to complete the repair.

Replacement A-Pillars (‘03-‘09) DRIVER SIDE MOP-1TE75BD1AA: $69.95 PASSENGER SIDE

SHIFT KNOB & PARTS

SHIFT KNOB, ‘89-‘18 52104174: $40.95

RETAINING NUT 6502556: $9.95 6-SPD INSERT - G56, ‘05-‘18 55366060AB: $8.95 5-SPD INSERT - NV4500, ‘89-‘04 4446921: $6.95

MOP-1TE74TL2AA: $69.95 Replace a broken A-pillar with this Mopar OEM replacement. It is

BILLET ALUMINUM SHIFT KNOB INSERT - NV5600 SHIFTERS ‘98-‘05 GG-NV5600SI: $14.95

Replacement A-PillarS (‘03-‘09) DRIVER SIDE DRM97631: $59.95 PASSENGER SIDE DRM97630: $59.95 Easy to install and durable, offering an exact fit that matches the original handle.

color-matched and does not require painting.

Custom ‘CUMMINS’ Shift Knobs (‘89-‘18) Any of these custom CUMMINS shift knobs will do an outstanding job of dressing up your truck’s interior. They fit both the transmission and/or the transfer case shifter.

Replacement A-pillars have reinforced mounting holes. Will not work with IMCO repair kits.

The shift knobs measure 2” round (the approximate size of a cue ball), a comfortable size for your hand. Threaded insert is M10 x 1.5mm.

A-Pillar Grab Handle Repair Kit, (‘03-‘09) DRIVER AND PASSENGER SIDE GG-GRAB-KIT: $69.00 DRIVER SIDE ONLY GG-GRAB-SGL: $36.00

‘Cummins C Power’ SHIFT_KN_R (RED): $49.95 SHIFT_KN_S (SILVER): $49.95 SHIFT_KN_B (BLACK): $49.95

‘CUMMINS C’ SHIFT_C_RED: $49.95 SHIFT_C_BLACK: $49.95 SHIFT_C_SILVER: $49.95

The OEM A-pillar grab handle in ‘03-‘09 Ram trucks is a known weak spot in the interior. Put too much weight on it and the mounting points will break. This Grab Handle Repair Kit has aluminum bushings that reinforce the mounting points to help prevent the grab handle from breaking or to repair one that is already broken. NOTE: This repair kit will only work if the mounting base is split or if the base is completely broken off of the A-pillar. NOTE: Will not work with new replacement A-pillars.

‘CUMMINS Dependable DIESEL’ SHIFT_RETRO1_RED: $49.95 SHIFT_RETRO2_BLACK: $49.95 SHIFT_RETRO3_SILVER: $49.95

Order 770-886-2500 or genosgarage.com 15

Product prices subject to change without notice.

Made with FlippingBook Ebook Creator