Available in Black color only.
Works great on the center console too.
CENTER CONSOLE LID KIT (‘03-‘05) GRAY/AGATE DRM924876: $312.95 TAUPE DRM924877: $250.00
Restore functionality of your Dodge Ram’s center console lid with a Center Console Kit. Includes all the materials and hardware needed to complete the repair.
Elbow Friend
STANDARD SIZE (8.5”L x 3W”) ELBOWFRIEND-STD: $21.99/pair
JUMB0 SIZE (10”L x 3W”)
ELBOWFRIEND-JMB: $29.99/pair Here is the problem: you have a truck with the same ‘ole hard plastic door panel and it’s uncomfortable as an arm rest. Here is the quick, easy and affordable answer: Elbow Friend. It is a comfortable pillow covered with durable fabric. We found the standard size to work well for most people, but a jumbo size is available too.
Door panel flex is a noticeable issue for 1989 to 1993 D/W 150/250/350 power window equipped trucks. Sometimes, the door flexes enough to pop the door panel clips. The flex is seen when a window is powered up to close and seats into the door frame. Cracks are usually seen around the interior door handle area of the steel door shell. If your doors door reinforcement kit (‘89-‘93 D/W 150/250/350) ND-UDRK93E: $209.00
Accessory/CB Mount (‘94-‘09) ‘03-‘09 WD_CB_0309: $56.95 ‘94-‘02 WD_CB1: $56.95 The mounting bracket uses the existing center seat bolts to hold it in place. The mounting surface for an accessory is 13” wide by 4.5” tall. To attach your accessories/CB,
you drill holes through the mount to correspond with the attachment points of your accessory/CB. This mount allows the use of the dash mounted cup holder
Includes driver and passenger side braces and hardware.
‘03-‘09
already have cracks, this eliminates the need to perform any welding. A total of 5 mounting bolts (supplied) are used for each side of the truck and the bar will also share the two existing interior handle fasteners. This kit is meant to do both sides and requires no welding. You will be required to drill a couple of holes. Mounting hardware is included. Photos are included of installation process to aid in understanding how they mount. The bar is made from 1/8" stainless steel which makes for a rigid assembly without taking up a ton of space. Note: This product is by no means an aid in vehicle safety. You should not expect your vehicle to perform any better from impact by adding these bars.
NOTE: In ‘03-‘09 trucks, the mount may interfere with the lower seat compartment handle.
and has clearance for the 4WD lever. The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The bracket is painted satin black forrust protection.
NOTE: Fits ‘06-‘09 with 40/20/40 seats only. NOTE: May not work with large CBs in trucks equipped with a
‘94-‘02
manual transmission. Check for clearance.
cupholders
Center Console Cupholders I ‘13-‘26 CUP-HOLDER-DBL: $49.95 Automatic transmission only. ‘03-‘12 CUP-HOLDER-03: $49.95 (Does not fit trucks with Captain’s
Door Pocket Drink Holder (‘09-‘26) DRIVER SIDE - ‘10-‘26 2500/3500, ‘09-‘18 1500, ‘19-‘23 1500 Classic 1LD23XXX-AA: $52.00 PASSENGER SIDE - ‘10-‘26 2500/3500, ‘09-‘18 1500, ‘19-‘23 1500 Classic 5NN24XXX-AA: $23.95 Does your truck have this spiffy foam rubber insert in the truck’s sidedoor pocket? If it doesn’t,get this one by Mopar to hold your things.
‘13-‘26 ‘Double Cup’ Cupholder
chairs and the big factory center console.) ‘98-‘02 CUP-HOLDER-9802: $49.95 ‘94-‘97 CUP-HOLDER-9497: $49.95 Not recommended with manual transmission truck.
Increase the storage capacity of the center console and help avoid messy liquid spills in the interior of your truck with our handy cup holder. Installs in minutes to the existing console. The Cupholder is form fitted to the inside diameters of the console and is designed so that it does not interfere with shifting
This cupholder will only work with the console pictured!
in manual transmission trucks. Cup wells are 4” deep. Upper diameter: 3-3/4”. Lower diameter: 2-3/4”. The cup wells have a slot for a coffee mug handle. Use a single self-tapping screw or velcro (included with the cup holder) to install the cup holder. The Cupholder attaches to the inside of the console. Some minor adjustments might be necessary to the console to get the lid to close properly.
Installation instructions are included.
‘94-‘97
‘98-‘02
‘13-‘26 Automatic
‘03-‘12
17 Order 770-886-2500 or genosgarage.com
Product prices subject to change without notice.
Made with FlippingBook Ebook Creator