Geno's Garage Catalog

Factory-Match (‘10-up)

Factory Match (‘03-‘09)

Phantom Series

Ultra-Lite Series

DESCRIPTION

Z Series

AM-8509 $101.95 AM-8508 $94.95 AM-8507 $98.95

AM-8506 $101.95 AM-8505 $90.95 AM-8504 $95.95

AM-5706 $87.95 AM-5705 $90.95 AM-5704 $87.95

AM-4306 $89.95 AM-4305 $90.95 AM-4304 $90.95

2” Boost Gauge • 100 psi (1/8 NPT) (includes fittings, tubing and light kit) 2” Boost Gauge • 60 psi (1/8 NPT) (includes fittings, tubing and light kit) 2” Boost Gauge • 35 psi (1/8 NPT) (includes fittings, tubing and light kit)

AM-2617 $87.95 AM-2616 $83.95

2” Electric Fuel Pressure Gauge • 30 psi * (electric, full sweep, stepper motor movement, includes 1/8 NPT sending unit)

AM-8561 $260.95

AM-8560 $260.95

AM-5760 $283.95

AM-4360 $288.95

AM-2660 $273.95

* If you are installing an AutoMeter electric fuel pressure gauge in your Ram Cummins truck, you MUST install this braided stainless steel line kit and #3279 fuel pressure snubber to prevent premature failure of the sending unit. Failure to do so will void the gauge warranty. AM-3227: $61.95

#4 Braided Stainless Steel Line Kit

AM-8546 $237.95 AM-8558 $ 189.95 AM-8550 $94.95

AM-8544 $236.95 AM-8557 $189.95 AM-8549 $94.95

AM-5744 $241.95

AM-4344 $244.95

AM-2654 $240.95

2” Exhaust Gas Temperature Gauge • 0°-1600° (includes Street Series Probe, wiring and light kit) 2” Trans Temp Gauge • 100°-260° (Full Sweep) (includes 1/8 NPT temp sender) 2” Trans Temp Gauge • 100°-250° (Short Sweep) (includes 1/8 NPT temp sender) 2” Oil Pressure Gauge • 0-100 psi (1/8 NPT sender and 1/4 NPT fittings/adapters) 2” Fuel Rail Pressure Gauge • 0-30,000 psi (‘03-‘07, 5.9L trucks) 2” Fuel Rail Pressure Gauge • 0-30,000 psi (‘07.5+, 6.7L trucks)

AM-5757 $77.95 AM-5727 $108.95 AM-5786 $192.95

AM-4357 $81.95 AM-4327 $106.95

AM-2640 $78.95 AM-2634 $104.95

H TDR74, p8-10

AM-8586 $233.95 AM-8593 $233.95

LED Lighting Dimmer

Designed to allow isolated dimming for all AutoMeter gauges with LED lighting separate from OEM dash. AM-9114: $46.95

*The fuel pressure gauges may require additional hardware depending on application. See pages 24 & 74-75 for hardware.

Back-up Camera for CTS/CTS3 EDGE-98203: $243.95 The CTS3 line of products have a built-in video port that allows users to connect the Edge back-up camera. The CTS3’s high-

Insight CTS3 & CS2 ‘96-‘24, 2500/3500 EDGE CTS3 ‘14-‘18, ECODIESEL EDGE CTS3 EDGE-84130: $474.95

The “Insight” Color Touch Screen 3 (CTS3) has a high-resolution, 5-inch screen to monitor the performance of your ‘96-‘24 OBD-II equipped truck.

resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. Features: License plate mount • Adjustable Camera Angle • Parking Guide Lines • Night Vision LEDs • Waterproof Quick and Easy Installation to connect to any Attitude CTS, Evolution CTS2/CTS3 or Insight CTS2/CTS3 • Extended USB & RCA, Power and Ground Cables to make installation easier **Monitor not included with purchase of camera.

‘96-‘20, 2500/3500 EDGE CS2 ‘14-‘18, ECODIESEL EDGE CS2 EDGE-84030: $286.95

NOTE: Limited data available on ‘96-‘07, 5.9L trucks.

The “Insight” CS2 has all of the same capabilities as the CTS3, but has a smaller 2.4-inch high-resolution screen with button-control.

At Geno’s we have used analog gauges in our Turbo Diesel trucks, but the concept of having multiple gauges that do not require fancy gauge mounts and a lot of underhood tinkering really appeals to us. The voice of experience screams out, “It can’t be any easier than plug-and-play using the OBD-II port.” And, plug-and-play we did. We love the CTS3 (and now the CS2) as it gives you up to eight data items that you can keep track of on the screen.

See our website for information about data and accessories. For more information about the operation of the Insight CTS3 and CS2 along with a complete listing of vehicle parameters, visit the EDGE Products website at: www.edgeproducts.com

CS2/cts2/CTS3 Dash Pod ‘06-‘09

EDGE-38505: $74.77

CS2/cts2/CTS3 A-Pillar Mount ‘10-‘18 EDGE-38405: $122.95 ‘03-‘09 EDGE-38406: $122.95 If you want a color-matched A-Pillar mount, no competitor matches EDGE. Will not warp or deform.

‘03-‘05 EDGE-38504: $74.77 ‘98.5-‘02 EDGE-38503: $88.23 Put your EDGE on the dash of your truck in a dash pod that won’t warp or deform over time. Pod is angled

‘19-‘24

‘03-‘09

‘10-‘18

for easy viewing. Adapter kit included.

CTS3 ALUMINUM A-PILLAR GAUGE MOUNT ‘19-‘24 2500/3500 EDGE-38603: $54.27 ‘10-‘18 1500/2500/3500/4500/5500 EDGE-38602: $54.27 ‘06-‘09 1500/2500/3500 EDGE-38600: $54.27

NOTE: The pod is molded in a charcoal/agate color. Can be painted to match the dash in your truck.

Adapter kit included with 38406.

Order 770-886-2500 or genosgarage.com 23

Product prices subject to change without notice.

Made with FlippingBook Ebook Creator