Adjustable Track Bar Kits (‘94-‘24)
TRACK BAR 4500/5500 (‘08-‘24) 2WD 68248930AA: $285.00 4WD 68248931AA: $865.00
Best Seller!
Direct bolt-on. No conversion brackets to install.
‘94-‘02, 4WD BD-1032011: $597.95
Cutaway shows design of track bar end.
DIRECT REPLACEMENT ADJUSTABLE TRACK BAR (‘94-‘02) RP28444G2: $276.64
‘03-‘13, 2500 4WD ‘03-‘12, 3500 4WD BD-1032013: $411.95
‘14-‘24, 2500 4WD ‘13-‘24, 3500 4WD BD-1032018: $411.95
Rare Parts Inc manufactures this direct replacement, adjustable heavy-duty track bar for Dodge Ram trucks. Pregreased with synthetic lubricant.
With the OEM ball joint design on ‘94-‘24 trucks, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble.” BD’s Track Bar is a good solution for steering stability and is a great complement to BD’s Steering Box Stabilizer. Plus, it is adjustable to accomodate up to 3”-4” lifts.
REPLACEMENT TRACK BAR BUSHINGS (‘94-‘12) Fits like OEM. 2 required. ‘08-‘12 RP22442: $24.95 each ‘94-‘02 RMTB105: $18.33 each Works with RP2844 and RP28442G2.
18MM track bar BUSHINGS ‘13-‘24, 3500 4WD ‘14-‘24, 2500 4WD EMF-BSHA-81862-18MM: $45.00 ea 2 required for each track bar. 16MM track bar BUSHINGS ‘7.5-‘12, 3500 ‘7.5-‘13, 2500 EMF-BSHA-40082-16MM: $45.00 ea 2 required for each track bar. Note: 2007 Models built after 3/18/07
Luke’s Link Replacement Track bar Bushings
Luke’s Link Track bar & Tie-Rod End Rebuild Kit (‘94-‘02, 4WD only) INDIVIDUAL LUKESLINK_TBRKIT: $72.00 SET OF 4 LUKESLINK_TBRKIT: $249.95
Factory hardware is reused to install the bushings.
‘03-‘07 - RED BUSHINGS LUKESLINK_BUSHINGKIT2: $42.00/pair NOTE: Fits 2007 trucks built prior to 3/18/2007.
‘94-‘02 - BLACK BUSHING LUKESLINK_BUSHING_IND: $18.00 (Only 1 bushing required.)
Use Luke’s Link’s heavy-duty kit to rebuild ‘94-‘02 track bars and tie- rod ends to better than new. The installation of this kit should last the life of the truck. It is greaseable and adjustable if it ever comes loose. Luke’s Link will also rebuild any of the four tie-rod ends. NOTE: Does not work on trucks with MOOG track bars. Will not fit over 2-1/16” diameter bar.
One of the weakest points on the ‘94-‘07 Ram 4WD truck suspension is the track bar and tie rod ends. Install these polyurethane bushings to tighten up the bar-to-frame connection.
Order 770-886-2500 or genosgarage.com 47
Product prices subject to change without notice.
Made with FlippingBook Ebook Creator