Intercooler Hoses Replacement intercooler hoses feature an exclusive Viton inner liner to better withstand high heat and contamination. Hoses are rated for 145 psi and are sold individually.
Harmonic Dampers
‘94-‘02 Pipe to Intercooler (Hot Side) 45° elbow GATES-26229: $192.95
‘94-‘02 Intercooler to Pipe (Cold Side) 45° elbow GATES-26232: $185.95
When was the last time you thought about the crankshaft vibration damper on your Dodge Cummins Turbo Diesel?
‘03-‘09 Pipe to Intercooler (Hot Side)
‘03-‘09 Intercooler to Pipe (Cold Side)
We will bet you did not know that your Owner’s Manual suggests that you inspect the damper every 30k, 60k, 90k, etc. miles. Get a reduction in noise, better idle quality,
GATES-26230: $54.95
‘94-‘96, 5.9L (built after 10-3-95)
Pipe to Engine (Cold Side)
Clamps included with each hose.
‘97-‘09, 5.9L & 6.7L Pipe to Engine (Cold Side)
less clutch/gearbox chatter (manual trans), and less vibration when accelerating in the 2000rpm to 3000rpm speed zone. ‘07.5-‘24, 6.7L FLUID_920321: $630.70 ‘03-‘07, 5.9L FLUID_920301: $630.70 ‘98.5-‘02, 24V FLUID_960301: $563.55 ‘94-‘98, 12V FLUID_960311: $630.70 (#960311 Includes Sensor Kit 300003) Drill Pin Kit, All Years FLUID_300002: $67.15 (Adds extra pins between the damper and the crank. Used on high horsepower trucks that exceed 3500 rpm in order to additionally secure the damper to the crankshaft.)
‘97-‘98, 5.9L 12V Turbo to Pipe (Hot Side)
‘94-‘96, 5.9L (built after 10-3-95)
Turbo to Pipe (Hot Side)
‘98.5-‘02, 5.9L 24V Turbo to Pipe (Hot Side)
‘97-‘02, 5.9L 12V & 24V Pipe to Engine (Cold Side)
LEARN MORE: HARMONIC DAMPER https://www.genosgarage.com/downloads/TechPDF/TDR114-Installing-Fluid-Dampr.pdf https://www.genosgarage.com/downloads/TechPDF/TDR73_HarmonicDamper.pdf
‘94-‘96, 5.9L (built before 10-2-95)
Pipe to Engine (Cold Side)
GATES-26231: $128.95
‘94-‘96, 5.9L (built before 10-2-95)
Turbo to Pipe (Hot Side)
‘03-‘09, 5.9L & 6.7L Turbo to Pipe (Hot Side)
GATES-26224: $92.95
‘07-‘09, 5.9L & 6.7L Pipe to Engine (Cold Side)
GATES-26237: $86.95
oem Vibration DamperS
‘10-‘12, 6.7L Intercooler to Pipe (Cold Side)
GATES-26233: $80.95
‘10-‘12, 6.7L Pipe to Engine (Cold Side)
GATES-26234: $82.95
The Cummins/Mopar vibration dampers are OEM replacements and are not designed for hi-performance applications.
‘10-‘12, 6.7L Pipe to Intercooler (Hot Side)
GATES-26235: $89.95
‘10-‘12, 6.7L Turbo to Pipe (Hot Side)
‘13-‘18, 6.7L Intercooler Pipe to Engine (Cold Side)
GATES-26235C: $89.95
CUMMINS
‘13-‘18, 6.7L 5333569: $522.00
MOPAR
intercooler hose kits
‘07.5-‘12, 6.7L 5285679: $620.00
‘19-‘24, 6.7L
68538446: $430.00
‘98.5-‘02, 24V 3918999: $299.95
‘03-‘07, 5.9L 05086735AA: $525.00
‘10-‘13, 6.7L ‘07.5-‘09, 6.7L ‘03-‘07, 5.9L ‘94-‘02, 5.9L
BD-1045217: $408.95 BD-1045216: $408.95 BD-1045215: $419.95 BD-1045210: $419.95
‘94-‘98, 12V 3924435: $345.00
‘89-‘93, 12V 3916436: $323.95
Black Nomex Silicone intercooler hoses designed for 75 psi of turbo boost with spring-loaded clamps to hold them in place.
Killer Dowel Pin Kit (‘89-‘02) ‘94-‘98, 12V - STRAIGHT TAB TST-KDP03: $65.00 ‘89-‘93 / ‘98.5-‘02, 24V - BENT TAB TST-KDP04: $65.00
The dowel pin used in the Cummins engine can back out of its bore. When it does, it can fall into the camshaft gear and cause all types
of expensive engine damage. The folks at TST Products have developed a kit to cover the dowel pin and prevent its movement. The kit is inexpensive protection. However, the labor involved to access the KDP and cover it with the cover tab is time consuming. Fortunately clear instructions make it a job that the D-I-Yer can handle. LEARN MORE: KILLER DOWEL PIN https://www.genosgarage.com/downloads/TechPDF/TDR57_KillerDowelPin.pdf
Hi-Torque Hose Clamps
2.75” BD-1405209: $23.95
3.00” BD-1405211: $23.95
3.50” BD-1405212: $23.95
4.00” BD-1405213: $23.95
These clamps are designed to be used where high boost levels require a hose clamp that can provide extra holding power.
Order 770-886-2500 or genosgarage.com 53
Product prices subject to change without notice.
Made with FlippingBook Ebook Creator