Adjustable Track Bar Kits (‘94-‘26)
TRACK BAR 4500/5500 (‘08-‘26) 2WD 68248930AA: $315.95 4WD 68248931AA: $889.95
‘94-‘02, 4WD BD-1032011: $622.95
Luke’s Link Replacement Track bar Bushings
Factory hardware is reused to install the bushings.
‘03-‘07 - RED BUSHINGS LUKESLINK_BUSHINGKIT2: $42.00/pair NOTE: Fits 2007 trucks built prior to 3/18/2007.
‘94-‘02 - BLACK BUSHING LUKESLINK_BUSHING_IND: $18.00 (Only 1 bushing required.)
‘03-‘13, 2500 4WD ‘03-‘12, 3500 4WD BD-1032013: $433.95
One of the weakest points on the ‘94-‘07 Ram 4WD truck suspension is the track bar and tie rod ends. Install these polyurethane bushings to tighten up the bar-to-frame connection.
‘14-‘26, 2500 4WD ‘13-‘26, 3500 4WD BD-1032018: $428.95
18MM track bar BUSHINGS ‘13-‘26, 3500 4WD ‘14-‘26, 2500 4WD EMF-BSHA-81862-18MM: $45.00 ea 2 required for each track bar. 16MM track bar BUSHINGS ‘7.5-‘12, 3500 ‘7.5-‘13, 2500 EMF-BSHA-40082-16MM: $45.00 ea 2 required for each track bar. Note: 2007 Models built after 3/18/07
With the OEM ball joint design on ‘94-‘24 trucks, frequent maintenance is required to prevent side-to-side movement of the front axle which can cause wear, hammering, wandering and the dreaded “Death Wobble.” BD’s Track Bar is a good solution for steering stability and is a great complement to BD’s Steering Box Stabilizer. Plus, it is adjustable to accomodate up to 3”-4” lifts.
REAR Leaf Spring Bushing SetS ‘03-‘09, 2500/3500 4WD ES_52118G: $162.26
NOTE: Does not include frame shackle bushings.
Front End Control Arm Bushing Set, 4WD
3” wide rear spring with 1-11/16” ID main eye. ‘94-‘02, 2500/3500 2WD ‘94-‘98, 2500/3500 4WD ES_52119G: $115.98
‘03-‘09, 2500/3500 ES_53142G: $186.86 (To check proper fit, see website for dimensions.)
‘99-‘02, 2500/3500 * ES_53131G: $163.28
‘99-‘02, 2500/3500 * ‘94-‘99, 2500/3500 ES_53120G: $160.66
2.5” wide rear spring with 1.75” ID main eye. ‘94-‘02, 2500/3500 2WD & 4WD ‘94-‘01, 1500 2WD & 4WD ES_52111G: $86.50
2.5” wide rear spring with 2.5” ID main eye. ‘94-‘02, 2500/3500 2WD & 4WD ‘94-‘01, 1500 2WD & 4WD ES_52109G: $100.55
* NOTE: ‘99-‘02 model trucks can use either 5.3131G or 5.3120G kits. It depends on the diameter of the bottom mounting bolt. If the bottom mounting bolt is 9/16” you will need 5.3120G. If the bolt is 5/8” you will need the 5.3131G kit.
52 Ram Turbo Diesel Parts & Accessories #132
Get Ram Cummins technical information at our website: https://www.genosgarage.com/tech_info
Made with FlippingBook Ebook Creator