SCHLEY Common Rail Injector Puller (‘03-‘24, 6.7L & 5.9L) Instead of trying to pry or use vise grips to remove the injector from the cylinder head damaging it, use this tool to do it properly and get your core charge back.
SCH17200 $98.95
CTA Fuel Injection Flare Nut Socket (19mm) The area surrounding the injection pumps on ‘94-‘18, 5.9L and 6.7L engines is very difficult to access when removing the fuel supply lines. This tool is designed with a slim configuration and 1/2” drive to fit into this confined area.
CTA2220X19 $26.43
Tork Tool Injection Pump Gear Puller (VE, P7100, VP44, CP3) Removing the gear from a Cummins VE, P7100, VP44 or CP3 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.
CGP020 $42.49
Tork Tool Injection Pump Gear Puller (VE, P7100, VP44) Removing the gear from a Cummins VE, P7100, or VP44 injection pump requires a specialized tool and this tool from Tork Tool works great. Don’t risk damaging the pump by using a pry bar or similar tool.
CGP010 $28.39
Tork Tool Injector Puller (‘89-‘98, 12V) Pulls Cummins injectors fast! This heavy-duty tool was designed to remove Cummins 6BT injectors without damaging the injector ball or indent groove in the head. This tool will remove even the most rusted injector.
CIP030 $26.69
Tork Tool Injector Puller (‘98-‘02, 24V) This heavy-duty tool was designed to make injector changing on a Cummins engine a simple project. The CIP040 features a thick wall tube and a custom washer that is machined to center on the tube. This automatically centers the tool over the injector body.
CIP040 $42.99
Common Rail Crossover Tube Remover (‘03-‘24, 5.9L & 6.7L) This tool is designed to be used on ‘03-‘23 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.
CTA2746 $10.70
Tork Tool Common Rail Crossover Tube Remover (‘03-‘24, 5.9L & 6.7L) This tool is designed to be used on ‘03-‘23 Dodge Cummins Turbo Diesel trucks to make pulling the common rail connector tube an easier job.
CRCTR010 $21.25
Tork Tool Injector Crossover Tube Puller (‘98.5-‘02, 5.9L) This tool is made to be used on ‘98.5-‘02 Dodge Cummins Turbo Diesel trucks to make pulling the crossover tube an easier job.
24VCTR010 $20.39
Fuel Rail Pressure Block Off Tool (‘07.5-‘18, 6.7L) Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.
LT-TESTCA2 $19.95
Fuel Rail Pressure Block Off Tool (‘03-‘07, 5.9L) Use this tool to block off fuel injector lines at the injection rail to help isolate a leaking or faulty fuel injector.
LT-TESTCA $19.95
HPCR Fuel Pump Return Flow Test Kit (‘03-‘07, 5.9L) This kit allows you to check the operation of a rail pressure relief valve and check for excessive return fuel flow from the CP3 pump. The individual tools may also be used for tests specified in the manual. Kit includes: (1) 12mm & (1) 14mm test fitting, gaskets, fuel line and a 1000cc clear plastic beaker.
GG-FPRKIT 44.95
Oil Pressure Switch Socket Fits 1-1/16” oil pressure sending unit (gauge type), found on most all ‘87 and newer Chrysler vehicles with combination light and gauge oil pressure switches. Use with 3/8” drive ratchet.
LC13250 $10.95
Order 770-886-2500 or genosgarage.com 91
Product prices subject to change without notice.
Made with FlippingBook Ebook Creator