Flat Band Hose Clamp This tool removes and installs flat band hose clamps used on heater and radiator hoses. Tips screw in and out to fit all clamp sizes. Ratcheting lock mechanism holds the clamp in an open position for each removal and installation. Tips can be switched to accommodate different applications. Offset jaws allow access in hard-to-reach areas.
LC17100 $27.95
Engine Barring Tool (‘89-‘24, 5.9L & 6.7L) Get this tool to turn the engine over when servicing the valves. Insert this metal barring tool into the flywheel housing to engage the flywheel ring gear. The engine can then be turned by hand using a 1/2-inch drive ratchet or breaker bar.
TOOL_LTBT $34.95
FLEECE Crankshaft Barring Tool (‘89-‘24, 5.9L & 6.7L) Attaches to harmonic damper bolts and allows you to turn your Cummins over with ease using 1/2” drive ratchet.
FPE-CCBT $78.74
Quick Quad Brake Pad Spreader This tool can be used while the brake caliper is on the vehicle or hanging free. Works on single, double, quad and six piston calipers.
LC29100 $65.95
Brake Bleeder The kit has everything needed to bleed your brakes with no mess. The plastic bottle collects the fluid, and three adapters fit common bleeder screws.
LC19200 $10.95
In-Line Brake Pad Measurement Gauge The compact Tool Aid in-line brake pad gauge allows for an easy and quick way to measure the thickness of both internal and external brake pads. In many instances, this can be done without removing the wheels. The color-coded indicator allows for quick at a glance reading and is calibrated for 6mm backing plates.
SGT65300 $18.95
Handy Bearing Packer Quickly flushes out old grease and repacks bearings with less mess. The Handy Packer works on bearings up to 3-1/2” OD. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the new grease shows on top of the bearing.
LC34550 $23.95
Brake/Hydraulic Clutch Fluid Tester Quickly determine the percentage of moisture in brake fluid or hydraulic clutch fluid. The tool uses red, yellow, and green indicator lights for easy readings. Includes a handy pocket clip and AAA battery.
PT-W182 $36.95
GATES Serpentine Belt Guide Tool Works great when you’re installing a serpentine belt in a very narrow location with not a lot of room to maneuver the belt.
GATES-91209 $19.95
Serpentine Belt Tension Tool Helps release the tension on spring loaded pulley tensioners in tight locations. Fits idler pulleys requiring 15mm, 16mm, or 18mm hex, and 3/8” or 1/2” square drive. Also includes 13mm, 14mm and 15mm crowfoot wrenches.
PT-W84010 $21.95
Pneumatic Fan Clutch Removal Set (‘89-‘24) Quickly removes and installs fan clutch. No holding wrench is necessary. Set includes 7 driving wrenches that fit your Ram Turbo Diesel truck and many other applications. Includes 7/8”, 32mm, 36mm, 40mm thin 47mm, 1-7/8”and 2” sizes. Use with an air hammer. Includes blow molded storage case. Fan Clutch Removal Wrench Set (‘91.5-‘24, 5.9L & 6.7L) Make removing the fan clutch easier on your 1991.5- 2023 Dodge Ram 5.9L and 6.7L Cummins trucks with these newly redesigned full-sized and heavy-duty wrenches made specifically for the job. The newer wrenches now have 17” long tapered handles. We designed this tool set in-house and have a local machine shop manufacture them to our specifications. The set comes unfinished but, if you prefer, you can use Krylon to paint them. Four Specialty wrenches come in this set, as follows:
LC43300 $149.95
GG-FC-WRENCHSET $58.95
1) 36mm Turning Wrench for 1991.5-2012 5.9L and 6.7L Cummins 2) 1-7/8” Turning Wrench for 2013-Up 5.9L and 6.7L Cummins
3) Counter Holding Wrench - holds the heads on the fan pulley. For 2003-Up 5.9L and 6.7L Cummins 4) Counter Holding Wrench - holds the heads on the fan pulley. For 1991.5-2002 5.9L Cummins
Order 770-886-2500 or genosgarage.com 93
Product prices subject to change without notice.
Made with FlippingBook Ebook Creator