LintEater Operator Manual

Step 12

Optional Method for Removing the Rods from the Vent:

Method 2:

It’s also possible to remove all of the rods at one time by spinning the rods (always in the clockwise direction) and pulling them out of the vent as you walk away from the vent hood. (providing you have the room to do so and it does not present a safety hazard to you or the surrounding area) Try to stop when the brush reaches the vent hood. This will keep the rods & brush from falling and will prevent possible damage to the surrounding area.

Step 13

Cleaning from “Inside” toward outside: This can be done by spinning the auger brush and rods from the inside toward the outside. Attach the Vacuum Adapter as shown. With the vacuum running, the loosened lint will be pulled back toward you and collected in the vacuum. Once you feel confident that you have cleaned the vent completely, you can remove the rods and brush from the vent as mentioned earlier. Important Note: The Vacuum Adapter is designed to fit a shop vac having a 2 ½” hose only. It is not recommended to use a shop vac or household vac having a 1 ½” hose (or smaller) since the lint being collected will continually clog the the hose.


Made with FlippingBook - professional solution for displaying marketing and sales documents online