Web Interface – Configuration
Auto - Port auto negotiating speed with the link partner and selects the highest speed that is compatible with the link partner. 10Mbps HDX - Forces the cu port in 10Mbps half duplex mode. 10Mbps FDX - Forces the cu port in 10Mbps full duplex mode. 100Mbps HDX - Forces the cu port in 100Mbps half duplex mode. 100Mbps FDX - Forces the cu port in 100Mbps full duplex mode. 1Gbps FDX - Forces the port in 1Gbps full duplex.
Ports in AMS mode with 1000-X speed has Cu port preferred. Ports in AMS mode with 1000-X speed has fiber port preferred. Ports in AMS mode with 100-FX speed has fiber port preferred.
Advertise Duplex When duplex is set as auto i.e auto negotiation, the port will only advertise the specified duplex as either Fdx or Hdx to the link partner. By default, port will advertise all the supported duplexes if the Duplex is Auto. Advertise Speed When Speed is set as auto i.e auto negotiation, the port will only advertise the specified speeds ( 10M, 100M, 1G ) to the link partner. By default port will advertise all the supported speeds if speed is set as Auto. Flow Control When Auto Speed is selected on a port, this section indicates the flow control capability that is advertised to the link partner. When a fixed-speed setting is selected, that is what is used. The Rx and Tx settings are determined by the result of the last Auto-Negotiation. Current Rx The Current Rx column indicates whether pause frames on the port are obeyed . Current Tx The Current Tx column indicates whether pause frames on the port are transmitted Configured When flow control is configured, the network element can control the flow of data transmission, to prevent the network from becoming overwhelmed. Flow control is configured for this port. This setting is related to the setting for Configured Link Speed.
Flow control is not configured for this port. (This is the default.)
Confidential
User Guide: CE Services
Page 147
Made with FlippingBook interactive PDF creator