Web Interface – Configuration
Ingress Report Set or show the ingress port for which this ACE applies: All: The ACE applies to all port Port n:
The ACE applies to this port number, where n is the number of the switch port.
Policy Filter Set or show the policy number filter for this ACE. Any:
No policy filter is specified. (policy filter status is “ don ’ t-care ” .) Specific: Filter a specific policy with this ACE. Two fields for entering a Policy Value and Policy Bitmask appear.
Policy Value Displayed only when Policy Filter = Specific. The user can enter a specific policy value. The allowed range is 0 to 255. Policy Bitmask Displayed only when Policy Filter = Specific. The user can enter a specific policy bitmask. The allowed range is 0x0 to 0xff.
Note:
The usage of bitmask, if the binary bit value is “ 0 ” , it means this bit is “ don ’ t-care ” . The real matched pattern is [Policy Value and Policy Bitmask]. For example, if the policy value is 3 and the policy bitmask is 0x10(bit 0 is “ don ’ t-care ” bit), then policy 2 and 3 are applied to this rule.
Frame Type Set or show the frame type for this ACE. These frame types are mutually exclusive. Any: Any frame can match this ACE Ethernet Type: Only Ethernet Type frames can match this ACE. The IEEE
802.3 describes the value of Length/Type Field specifications to be greater than or equal to 1536 decimal (equal to 0600 hexadecimal)
ARP:
Only ARP frames can match this ACE.
Confidential
User Guide: CE Services
Page 211
Made with FlippingBook interactive PDF creator