Web Interface – Configuration
Note: The ARP frames won ’ t match the ACE with Ethernet type.
IPv4:
Only IPv4 frames can match this ACE.
Note: The IPv4 frames won ’ t match the ACE with Ethernet type.
IPv6:
Only IPv6 frames can match this ACE. Notice the IPv6 frames won ’ t match the ACE with Ethernet type.
Action Set or show the action to take with a frame that hits this ACE. Permit: The frame that hits this ACE is granted permission for the ACE operation Deny: The frame that hits this ACE is dropped Filter: Frames matching the ACE are filtered Rate Limiter Set or show the rate limiter in number of base units. The allowed range is 1 to 16. Disabled indicates that the rate limiter operation is disabled. EVC Policer Select whether EVC policer is enabled or disabled. The default value is "Disabled". Note that the ACL rate limiter and EVC policer can not both be enabled. EVC Policer ID Select which EVC policer ID to apply on this ACE. The allowed values are Disabled or the values 1 through 256. Port Redirect Set or show the destination port number. Frames that hit the ACE are redirected to the port number specified here. The rate limiter will affect these ports. The allowable values for port redirect are:
“ Disabled ”
¾
¾ A valid port number When the Port Redirect is “ Disabled the Port Redirect operation is disabled and the specific port number of ‘ Port Redirect ’ cannot be set when the action is permitted. Mirror Set or show the mirror operation of this port. Enabled: Frames received on the port are mirrored Disabled: Frames received on the port are not mirrored (The default value is “ Disabled ” .) Frames matching the ACE are mirrored to the destination mirror port. The rate limiter will not affect frames on the mirror port.
Confidential
User Guide: CE Services
Page 212
Made with FlippingBook interactive PDF creator