Web Interface – Configuration
previous request. This will stop the switch from continually trying to contact a server that it has already determined as dead. Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only if more than one server has been configured. Key Set or show secret key - up to 63 characters long - shared between the RADIUS server and the switch. NAS-IP-Address IPv4 (Attribute 4) Set or show the IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If this field is left blank, the IP address of the outgoing interface is used. IPv6 (Attribute 95) Set or show the IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. If this field is left blank, the IP address of the outgoing interface is used. NAS-Identifier (Attribute 32) Set or show the identifier - up to 253 characters long - to be used as attribute 32 in RADIUS Access-Request packets. If this field is left blank, the NAS-Identifier is not included in the packet.
4.38.2 Server Configuration
The table has one row for each RADIUS server and a number of columns, with the following parameters: Delete Check to delete a RADIUS server entry. The entry will be deleted during the next save.
Do not delete the entry. (This is the default.)
Hostname Set or show the IP address or hostname of the RADIUS server. Auth Port The UDP port to use on the RADIUS server for authentication. Acct Port Set or show the UDP port to use on the RADIUS server for accounting. Timeout Set or show this optional setting that overrides the global timeout value. Leaving it blank will use the global timeout value. Retransmit Set or show this optional setting that overrides the global retransmit value. Leaving it blank will use the global retransmit value.
Confidential
User Guide: CE Services
Page 237
Made with FlippingBook interactive PDF creator