Web Interface – Configuration
IP Address The IP address can be used to calculate the destination port for the frame. By default, IP Address is enabled.
Check to enable the use of the IP Address (This is the default.)
Uncheck to disable the use of the IP Address
TCP/UDP Port Number The TCP/UDP port number can be used to calculate the destination port for the frame. By default, TCP/UDP Port Number is enabled.
Check to enable the use of the TCP/UDP Port Number (This is the default.)
Uncheck to disable the use of the TCP/UDP Port Number
4.40.2 Aggregation Group Configuration
This section allows the user to configure aggregation groups.
Group ID Set or show the group ID for the settings contained in the same row. Group ID “ Normal ” indicates there is no aggregation. Only one group ID is valid per port. Port Members Each switch port is listed for each group ID. Select a radio button to include a port in an aggregation, or clear the radio button to remove the port from the aggregation. By default, no ports belong to any aggregation group. Only full duplex ports can join an aggregation and ports must be in the same speed in each group.
4.40.3 Aggregation Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
Confidential
User Guide: CE Services
Page 242
Made with FlippingBook interactive PDF creator