Web Interface – Configuration
4.41 Aggregation – LACP
LACP is an IEEE 802.3ad standard protocol. The Link Aggregation Control Protocol, allows bundling several physical ports together to form a single logical port.
4.41.1 LACP Port Configuration
This page allows the user to inspect and change LACP Port configurations:
Port This column displays the switch port number. LACP Enabled Set or show whether LACP is enabled on this switch port. LACP will form an aggregation when 2 or more ports are connected to the same partner.
LACP is enabled on this switch port
LACP is disabled on this switch port (This is the default.) Up to 32 aggregations are supported (if stackable). Key
Set or show the Key value incurred by the port, range 1-65535 . The Auto setting will set the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a user-defined value can be entered. Ports with the same Key value can participate in the same aggregation group, while ports with different keys cannot.
Confidential
User Guide: CE Services
Page 243
Made with FlippingBook interactive PDF creator