Web Interface – Configuration
VLAN ID Set or show the VLAN ID of the entry. MLD Snooping Enabled Set or show the per VLAN MLD Snooping status.
Enable the Global MLD Snooping
Disable the Global MLD Snooping (This is the default.) Up to 32 VLANs can be selected for MLD Snooping. Querier Election
Enable this entry to join MLD Querier election in the VLAN (This is the default.) Disable this entry to act as an MLD Non-Querier Querier election is used to dedicate the Querier. This is the only Querier to which the sends Query messages, on a particular link. Querier election rule determines that MLD Querier or MLD Querier with the lowest IPv4/IPv6 address wins the election. Compatibility Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of MLD operating on hosts and routers within a network. The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv2, default compatibility value is MLD-Auto. PRI Priority of Interface. It indicates the MLD control frame priority level generated by the system. These values can be used to prioritize different classes of traffic. The allowed range is 0 (best effort) to 7 (highest), default interface priority value is 0. RV Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2.
QI Query Interval.
The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds.
Confidential
User Guide: CE Services
Page 280
Made with FlippingBook interactive PDF creator