Web Interface – Configuration
QRI Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response interval is 100 in tenths of seconds (10 seconds). LLQI (LMQI for IGMP) Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in tenths of seconds (1 second). The logical port for the settings. Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1 second.
4.57.2 MLD Snooping VLAN Configuration Buttons
Refresh: Refreshes the displayed table starting from the “ VLAN ” input fields.
Back Arrows (
):
Updates the table starting from the first entry in the
VLAN Table, i.e. the entry with the lowest VLAN ID.
): Updates the table, starting with the entry after the last
Forward Arrows (
entry currently displayed.
Add a New IGMP VLAN:
Click to add new MLD VLAN. Specify the VID and configure the new entry. After creation of the new entry the user must click “Save”. T he specific MLD VLAN starts working after the corresponding static VLAN is also created.
Save:
Click to save all changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Confidential
User Guide: CE Services
Page 281
Made with FlippingBook interactive PDF creator