Web Interface – Configuration
4.61 SyncE
This page allows the user to inspect and configure the current SyncE (Synchronous Ethernet) port settings.
4.61.1 Clock Source Nomination and State
For each possible clock source the following can be configured.
Clock Source This is the instance number of the clock source. This has to be referenced when selecting 'Manual' Mode. Nominated When a clock source is nominated, the clock output from the related PHY (Port) is enabled against the clock controller. This makes it available as a possible source in the clock selection process. If it is supported by the actual HW configuration, The Station clock input can be nominated as a Clock Source. Port In this drop down box, the ports that are possible to select for this clock source, is presented. The PCB104 Synce module supports 10MHz station clock input. The station clock input is indicated by a port name = 'S-CLK'. The serval1 has a limitation that chip port 1 cannot be nominated as source 1. On the Vitesse boards this is port 7 (interface gi 1/7).
Confidential
User Guide: CE Services
Page 295
Made with FlippingBook interactive PDF creator