Web Interface – Monitor
5.14 Link OAM – Port Status
This page provides Link OAM configuration operational status. The displayed fields shows the active configuration status for the selected port.
5.14.1 Local and Peer Mode
The Mode in which the Link OAM is operating, Active or Passive. Unidirectional Operation Support This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY. Remote Loopback Support If status is enabled, DTE is capable of OAM remote loopback mode. Link Monitoring Support If status is enabled, DTE supports interpreting Link Events. MIB Retrieval Support If status ie enabled DTE supports sending Variable Response OAMPDUs. MTU Size It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used. Multiplexer State When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.
Confidential
User Guide: CE Services
Page 408
Made with FlippingBook interactive PDF creator