Command Line Interface
Dot1x Port Control Set the port security state, values are: force-authorized: port access is allowed force-unauthorized: port access is not allowed auto:
port-based 802.1X authentication
mac-based:
switch authenticates on behalf of the client
multi:
Multiple Host 802.1X Authentication
single:
Single Host 802.1X Authentication
Syntax: dot1x port-control { force-authorized | force-unauthorized | auto | single | multi | mac-based }
Dot1x Radius-qos Enables/disables per-port state of RADIUS-assigned QoS. Syntax: dot1x radius-qos Dot1x Radius-vlan Enables/disables per-port state of RADIUS-assigned VLAN. Syntax: dot1x radius-vlan
Dot1x Re-authenticate Refresh (restart) 802.1X authentication process. Syntax: dot1x re-authenticate
2.3.22.6 (Interface – Port Type) Duplex
Set the interface duplexity. Values are: half: forced half duplex full: forced full duplex auto: auto negotiation of duplex mode, with an optional specification: full: advertise full duplex half: advertise half duplex Syntax: duplex { half | full | auto [ half | full ] }
2.3.22.7 (Interface – Port Type) End Go back to EXEC mode. Syntax: end
Confidential
User Guide: CE Services
Page 48
Made with FlippingBook interactive PDF creator