Command Line Interface
window:
Set a window of time during which error frames are counted. <1-60>: Duration of the monitoring period in terms of seconds.
mib-retrieval Set MIB retrieval support. Syntax: link-oam mib-retrieval supported Supported: Enable or Disable (when the no keyword is entered) MIB retrieval support on the interface. Mode Set Link OAM mode Active or Passive on this interface. Syntax: link-oam mode { active | passive } active: Enable Link OAM Active mode on this interface passive: Enable Link OAM Passive mode on this interface remote-loopback Link OAM remote loopback support. Syntax: link-oam remote-loopback supported supported: Enable or Disable (when the no keyword is entered) remote loopback on the interface.
variable-retrieve Set MIB variable retrieve local info or remote info. Syntax: link-oam variable-retrieve { local-info | remote-info } local-info: Set MIB retrieve local info remote-info: Set MIB retrieve remote info
2.3.22.19 (Interface – Port Type) LLDP
Set LLDP configurations. The following options are available: cdp-aware: Configures if the interface shall be CDP aware (CDP discovery information is added to the LLDP neighbor table) med: Media Endpoint Discovery. receive: Enable/Disable decoding of received LLDP frames. tlv-select: Which optional TLVs to transmit. transmit: Enable/Disabled transmission of LLDP frames. Syntax: lldp cdp-aware
Confidential
User Guide: CE Services
Page 53
Made with FlippingBook interactive PDF creator