Command Line Interface
lldp med media-vlan policy-list <v_range_list> lldp med transmit-tlv [ capabilities ] [ location ] [ network-policy ] [ poe ] lldp med type { connectivity | end-point } lldp receive lldp tlv-select { management-address | port-description | system- capabilities | system-description | system-name } lldp transmit
2.3.22.20 (Interface – Port Type) Loop-Protect
Set the loop protection configuration on the port. loop-protect:
enable loop protection configuration on this port
loop-protect action:
action to take if loop detected, values are:
shutdown: shutdown port log: generate log
loop-protect tx-mode:
actively generate PDUs
Syntax: loop-protect loop-protect action { [ shutdown ] [ log ] }*1 loop-protect tx-mode
2.3.22.21 (Interface – Port Type) MAC Set the MAC security mode. Syntax:
mac address-table learning [ secure ] address-table: MAC table configuration learning: port learning mode [secure]: port secure mode
2.3.22.22 (Interface – Port Type) Media-Type Set the media type, values are: Syntax: media-type { rj45 | sfp | dual } dual:
dual media interface (copper and fiber interface)
rj45:
rj45 interface (copper interface only)
sfp:
sfp interface (fiber interface)
2.3.22.23 (Interface – Port Type) MTU
Set the maximum transmission unit. The following is a required parameter: <max_length>: maximum frame size in bytes (values are: 1,518-9,600) Syntax:
Confidential
User Guide: CE Services
Page 54
Made with FlippingBook interactive PDF creator