Command Line Interface
Syntax: port-security port-security aging port-security aging time <v_10_to_10000000> <10-10000000>: seconds.
2.3.41 Privilege
Set the command privilege parameters, to allow or deny access to specific parameters. Syntax: privilege <mode_name> level <privilege> <cmd> <cword> Valid words are 'config-vlan' 'configure' 'dhcp-pool' 'exec' 'if-vlan' 'interface' 'ipmc-profile' 'json-noti-host' 'line' 'snmps-host' 'stp-aggr'. level: set privilege level of command. <privilege>: privilege level, values are 0-15. Precision time Protocol (1588). Syntax: ptp <clockinst> clk sync <threshold> ap <ap> ptp <clockinst> domain <domain> ptp <clockinst> filter [ delay <delay> ] [ filter-type { basic | ms- pdv } ] [ period <period> ] [ dist <dist> ] ptp <clockinst> ho [ filter <ho_filter> ] [ adj-threshold <adj_threshold> ] ptp <clockinst> localpriority <localpriority> ptp <clockinst> log <debug_mode> ptp <clockinst> mode { boundary | e2etransparent | p2ptransparent | master | slave | bcfrontend } [ onestep | twostep ] [ ethernet | ethernet-mixed | ip4multi | ip4mixed | ip4unicast | oam | onepps ] [ oneway | twoway ] [ id <v_clock_id> ] [ vid <vid> [ <prio> ] [ tag ] ] [ mep <mep_id> ] [ profile { ieee1588 | g8265.1 | g8275.1 } ] [ clock- domain 0 ] [ dscp <dscp_id> ]
2.3.42 PTP
ptp <clockinst> priority1 <priority1> ptp <clockinst> priority2 <priority2>
ptp <clockinst> servo ad <ad> ptp <clockinst> servo ai <ai> ptp <clockinst> servo ap <ap>
ptp <clockinst> servo displaystates ptp <clockinst> servo gain <gain> ptp <clockinst> servo phase-mode ptp <clockinst> slave-cfg [ stable-offset <stable_offset> ] [ offset- ok <offset_ok> ] [ offset-fail <offset_fail> ]
Confidential
User Guide: CE Services
Page 94
Made with FlippingBook interactive PDF creator