Command Line Interface
period:
Set offset filter period parameter. <1-10000> Measurement period in number of sync events, valid range: 1-10000.
ho:
Set PTP Servo holdover parameters. adj-threshold:
Set adjustment threshold. <1-3000>: [1..3000] max frequency adjustment change within the holdover stabilization period (in units of 0.1 ppb). Set stabilization period. <10-86400>: [10..86400] Holdover filter and stabilization period.
filter:
localpriority:
Local priority for G8275.1 BMC algorithm (1 is highest priority). <1-255>: PTP clock priority1: range = 1-255.
log:
Set the PTP debug mode. <1-4>: 1-4 Debug log mode, 1 => log offset from master, 2 => log sync packets, 3 => log Delay_req, 4 => log both.
mode:
Enable a PTP instance: bcfrontend:
Boundary Clock front end
boundary: Ordinary / Boundary clock e2etransparent: End to end transparent clock master: Master only clock p2ptransparent: Peer to peer transparent clock slave: Slave only clock. priority1: Clock priority 1 for PTP BMC algorithm (0 is highest priority). <0-255>: PTP clock priority1: range = 0-255. priority2: Clock priority 2 for PTP BMC algorithm (0 is highest priority). <0-255>: PTP clock priority2: range = 0-255. servo: Set Servo parameters: ad: Set 'D' parameter in the servo ai: Set 'I' parameter in the servo ap: Set 'P' parameter in the servo displaystates:
Enable logging of servo parameters on the console
gain:
Set PID servo gain parameter.
phase-mode:
Enable phase mode in the servo
Confidential
User Guide: CE Services
Page 96
Made with FlippingBook interactive PDF creator