Logging Set or show the logging operation of the ACE: Enabled: Frames matching the ACE are stored in the System Log Disabled: Frames matching the ACE are not logged .
Note:
The logging message doesn’t include the 4 bytes CRC information.
The logging feature only works when the packet length is less than 1518(without VLAN tags) and the System Log memory size and logging rate is limited. Shutdown Set or show the port shut down operation of the ACE: Enabled: If a frame matches the ACE, the ingress port will be disabled Disabled: Port shut down is disabled for the ACE
Note:
The shutdown feature only works when the packet length is less than 1518(without VLAN tags).
Counter The counter indicates the number of times the ACE was hit by a frame.
4.23.2.2
MAC Parameters
SMAC Filter SMAC Filter is displayed only when the Frame Type is Ethernet Type or ARP. Set or show the source MAC filter for this ACE. Any: No SMAC filter is specified (SMAC filter status is “don’t care”.) Specific: Filter a specific source MAC address with this ACE. A field for entering a SMAC value appears. SMAC Value When “Specific” is selected for the SMAC filter, the user can enter a specific source MAC address. The legal format is “xx-xx-xx-xx-xx-xx” or “xx.xx.xx.xx.xx.xx” or “xxxxxxxxxxxx” (x is a hexadecimal digit). A frame that hits this ACE matches this SMAC value. DMAC Filter Set or show the destination MAC filter for this ACE. Any: No DMAC filter is specified (DMAC filter status is “don’t care”.)
SMB - CLI UM
Rev: 1.1
Page 123 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator