IP Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. 0: Not a Match ARP/RARP frames where the HLD is not equal to Ethernet (1) 1: Match ARP/RARP frames where the HLD is equal to Ethernet (1) Any: Any value is allowed (“don’t-care”) Ethernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. 0: Not a Match ARP/RARP frames where the PRO is not equal to IP (0x800) 1: Match ARP/RARP frames where the PRO is equal to IP (0x800) Any: Any value is allowed (“don’t-care”)
4.23.2.5
IP Parameters The IP parameters can be configured when Frame Type “IPv4” is selected.
IP Protocol Filter Set or show the IP protocol filter for this ACE. Any:
No IP protocol filter is specified (“don’t care”) Specific: Filter a specific IP protocol filter with this ACE. A field for entering an IP protocol filter appears ICMP:
Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for defining ICMP parameters will appear. These fields are explained later in this help file.
SMB - CLI UM
Rev: 1.1
Page 127 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator