Host: Target IP filter is set to Host. Specify the target IP address in the Target IP Address field that appears Network: Target IP filter is set to Network. Specify the target IP address and target IP mask in the Target IP Address and Target IP Mask fields that appear Target IP Address When “Host” or “Network” is selected for the target IP filter, the user can enter a specific target IP address in dotted decimal notation. Target IP Mask When “Network” is selected for the target IP filter, the user can enter a specific target IP mask in dotted decimal notation. ARP Sender MAC Match Specify whether frames can hit the action according to their Sender Hardware Address field (SHA) settings. 0: Not a Match ARP frames where SHA is not equal to the SMAC address 1: Match ARP frames where SHA is equal to the SMAC address Any: Any value is allowed (“don’t care”). RARP Target MAC Match Specify whether frames can hit the action according to their target hardware address field (THA) settings. 0: Not a Match RARP frames where THA is not equal to the target MAC address 1: Match RARP frames where THA is equal to the target MAC address Any: Any value is allowed (“don’t-care”) IP/Ethernet Length Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. 0: Not a Match ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is not equal to IPv4 (0x04) 1: Match ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4 (0x04) Any: Any value is allowed (“don’t-care”)
SMB - CLI UM
Rev: 1.1
Page 126 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator