4.23.2.4
ARP Parameters The ARP parameters can be configured when Frame Type “ARP” is selected.
ARP/RARP Set or show the available ARP/RARP opcode (OP) flag for this ACE Any: No ARP/RARP OP flag is specified. (OP is “don’t-care”.) ARP: Frame must have ARP opcode set to ARP
RARP: Frame must have RARP opcode set to RARP Other: Frame has unknown ARP/RARP Opcode flag
Request/Reply Set or show the available Request/Reply opcode (OP) flag for this ACE Any: No Request/Reply OP flag is specified. (OP is “don’t-care”.) Request: Frame must have ARP Request or RARP Request OP flag set Reply: Frame must have ARP Reply or RARP Reply OP flag
Send IP Filter Set or show the sender IP filter for this ACE. Any:
No sender IP filter is specified. (Sender IP filter is “don’t care”.)
Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP Address field that appears Network: Sender IP filter is set to Network. Specify the sender IP address and sender IP mask in the SIP Address and SIP Mask fields that appear. Send IP Address When “Host” or “Network” is selected for the sender IP filter, the user can enter a specific sender IP address in dotted decimal notation. Send IP Mask When “Network” is selected for the sender IP filter, the user can enter a specific sender IP mask in dotted decimal notation.
Target IP Filter Set or show the target IP filter for this specific ACE. Any:
No target IP filter is specified. (Target IP filter is “don’t-care”.)
SMB - CLI UM
Rev: 1.1
Page 125 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator