GigabitEthernet 1/2 access-list redirect is disabled GigabitEthernet 1/2 access-list mirror is disabled GigabitEthernet 1/2 access-list logging is disabled GigabitEthernet 1/2 access-list shutdown is disabled GigabitEthernet 1/2 access-list port-state is enabled GigabitEthernet 1/2 access-list counter is 0 Example 3 Use show access-list for port 6 on switch 1 only (1/6 only): Input: AMP8MG# show access-list interface gigabitethernet 1/6 Output:
GigabitEthernet 1/6 : ---------------------
GigabitEthernet 1/6 access-list action is permit GigabitEthernet 1/6 access-list policy ID is 0 GigabitEthernet 1/6 access-list rate limiter ID is disabled GigabitEthernet 1/6 access-list redirect is disabled GigabitEthernet 1/6 access-list mirror is disabled GigabitEthernet 1/6 access-list logging is disabled GigabitEthernet 1/6 access-list shutdown is disabled GigabitEthernet 1/6 access-list port-state is enabled GigabitEthernet 1/6 access-list counter is 0 AMP8MG# Output Modifiers It is possible to filter the output of display commands with output modifiers: Modifier Description
2.1.3
begin
begin with the line that matches
exclude
exclude lines that match
include
include lines that match
LINE
String to match output lines
The following example shows the proper syntax for an output modifier: Input: AMP8MG# show access-list | include policy Output:
GigabitEthernet 1/1 access-list policy ID is 0 GigabitEthernet 1/2 access-list policy ID is 0 GigabitEthernet 1/3 access-list policy ID is 0 GigabitEthernet 1/4 access-list policy ID is 0 GigabitEthernet 1/5 access-list policy ID is 0 GigabitEthernet 1/6 access-list policy ID is 0 GigabitEthernet 1/7 access-list policy ID is 0 GigabitEthernet 1/8 access-list policy ID is 0
SMB - CLI UM
Rev: 1.1
Page 13 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator