TCP/UDP Source Port Filter Set or show the TCP/UDP source filter for this ACE. Any: No TCP/UDP source filter is specified (TCP/UDP source filter status is “don’t care”) Specific: To filter a specific TCP/UDP source filter with this ACE, the user can enter a specific TCP/UDP source value. A field for entering a TCP/UDP source value appears. Range: To filter a specific TCP/UDP source range filter with this ACE, the user can enter a specific TCP/UDP source range value. A field for entering a TCP/UDP source value appears. TCP/UDP Source Port Number When “Specific” is selected for the TCP/UDP source filter, the user can enter a specific TCP/UDP source value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP source value. TCP/UDP Source Port Range When “Range” is selected for the TCP/UDP source filter, the user can enter a specific TCP/UDP source range value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP source value. TCP/UDP Destination Port Filter Set or show the TCP/UDP destination filter for this ACE. Any: No TCP/UDP destination filter is specified (TCP/UDP destination filter status is “don’t care”). Specific: To filter a specific TCP/UDP destination filter with this ACE, the user can enter a specific TCP/UDP destination value. A field for entering a TCP/UDP destination value appears. Range: To filter a specific range TCP/UDP destination filter with this ACE, you can enter a specific TCP/UDP destination range value. A field for entering a TCP/UDP destination value appears. TCP/UDP Destination Port Number When “Specific” is selected for the TCP/UDP destination filter, the user can enter a specific TCP/UDP destination value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP destination value. TCP/UDP Destination Port Range When “Range” is selected for the TCP/UDP destination filter, the user can enter a specific TCP/UDP destination range value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP destination value. TCP FIN Set or show the TCP “No more data from sender” (FIN) value for this ACE. 0: TCP frames where the FIN field is set must not be able to match this entry 1: TCP frames where the FIN field is set must be able to match this entry
SMB - CLI UM
Rev: 1.1
Page 132 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator