Key Set or show secret key - up to 63 characters long - shared between the RADIUS server and the switch.
NAS-IP-Address IPv4 (Attribute 4)
Set or show the IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If this field is left blank, the IP address of the outgoing interface is used. IPv6 (Attribute 95) Set or show the IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. If this field is left blank, the IP address of the outgoing interface is used. NAS-Identifier (Attribute 32) Set or show the identifier - up to 253 characters long - to be used as attribute 32 in RADIUS Access-Request packets. If this field is left blank, the NAS-Identifier is not included in the packet. Server Configuration The table has one row for each RADIUS server and a number of columns, with the following parameters:
4.24.2
Delete
Check to delete a RADIUS server entry. The entry will be deleted during the next save.
Do not delete the entry. (This is the default.)
Hostname Set or show the IP address or hostname of the RADIUS server. Auth Port The UDP port to use on the RADIUS server for authentication. Acct Port Set or show the UDP port to use on the RADIUS server for accounting. Timeout Set or show this optional setting that overrides the global timeout value. Leaving it blank will use the global timeout value. Retransmit Set or show this optional setting that overrides the global retransmit value. Leaving it blank will use the global retransmit value. Key Set or show this optional setting that overrides the global key. Leaving it blank will use the global key.
4.24.3
RADIUS Server Configuration Buttons Add New Server:
Click to add a new RADIUS Server entry. An empty row is added to the
SMB - CLI UM
Rev: 1.1
Page 136 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator