table, and the RADIUS server can be configured as needed. Up to 5 servers are supported.
Delete: Click to undo the addition of the new server . Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
4.25
Aggregation – Static
Aggregation mode uses multiple ports in parallel to increase the link speed beyond the limits of a port and to increase the redundancy for higher availability. This page allows the user to configure Aggregation Mode parameters.
4.25.1
Aggregation Mode Configuration Hash Code Contributors This section allows the user to configure Hash Code Contributors: Source MAC Address The Source MAC address can be used to calculate the destination port for the frame. By default, Source MAC Address is enabled.
Check to enable the use of the Source MAC address (This is the default.)
Uncheck to disable the use of the Source MAC address Destination MAC Address The Destination MAC Address can be used to calculate the destination port for the frame. By default, Destination MAC Address is disabled.
Check to enable the use of the Destination MAC Address
SMB - CLI UM
Rev: 1.1
Page 137 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator