4.26.1
LACP Port Configuration This page allows the user to inspect and change LACP Port configurations:
Port This column displays the switch port number.
LACP Enabled Set or show whether LACP is enabled on this switch port. LACP will form an aggregation when 2 or more ports are connected to the same partner.
LACP is enabled on this switch port
LACP is disabled on this switch port (This is the default.) Up to 32 aggregations are supported (if stackable).
Key Set or show the Key value incurred by the port, range 1-65535 . The Auto setting will set the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a user-defined value can be entered. Ports with the same Key value can participate in the same aggregation group, while ports with different keys cannot.
Role Set or show the LACP activity status:
Active: Transmit LACP packets each second Passive Wait for an LACP packet from a partner (speak if spoken to)
Timeout Set or show the period between BPDU transmissions. Fast Transmit LACP packets each second Slow
Wait for 30 seconds before sending a LACP packet
SMB - CLI UM
Rev: 1.1
Page 139 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator