4.27
Loop Protection (Configuration)
When loop protection is enabled, the spanning-tree topology detects root ports and blocked ports and makes sure both keep receiving BPDUs. This page allows the user to inspect and change the Loop Protection Configuration.
4.27.1
General Settings This section allows the user to configure the Global Configuration settings: Enable Loop Protection Set or show the global Loop Protection status: Enabled: Loop Protection is enabled (globally) Disabled: Loop Protection is disabled (globally)(This is the default.) Transmission Time Set or show the interval between each loop protection PDU sent on each port. Valid values are 1 to 10 seconds. Shutdown Time The period (in seconds) for which a port will be kept disabled in the event a loop is detected (and the port action shuts down the port). Valid values are 0 to 604800 seconds (7 days). A value of zero will keep a port disabled (until next device restart).
SMB - CLI UM
Rev: 1.1
Page 141 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator