4.27.2
Port Configuration Port This column displays the switch port number.
Enable Set or show whether Loop Protection is enabled on this switch port.
Loop Protection is enabled on this switch port (This is the default.)
Loop Protection is disabled on this switch
Action Set or show the action to perform when a loop is detected on a port. Valid values are:
Shutdown Port
Shutdown Port and Log
Log Only.
Tx Mode Set or show whether the port is actively generating loop protection PDUs Enabled: Port is actively generating loop protection PDUs Disabled: Port is passively looking for looped PDUs
4.27.3
Loop Protection Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 142 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator