Maximum Hop Count Set or show the initial value of remaining Hops for MSTI information generated at the boundary of an MSTI region. It defines how many bridges a root bridge can distribute its BPDU information to. Valid values are in the range 6 to 40 hops. Transmit Hold Count Set or show the number of BPDU’s a bridge port can send per second. When exceeded, transmission of the next BPDU will be delayed. Valid values are in the range 1 to 10 BPDUs per second. STP Bridge Configuration – Advanced Settings This section allows the user to configure the Bridge Configuration Advanced settings: Edge Port BPDU Filtering Set or show Edge Port BPDU Filtering status. When Edge Port BPDU Filtering is enabled, a port explicitly configured as Edge will transmit and receive BPDUs.
4.28.2
Edge Port BPDU Filtering is enabled
Edge Port BPDU Filtering is disabled (This is the default.) Edge Port BPDU Guard Set or show Edge Port BPDU Guard status.
When Edge Port BPDU Guard is enabled, a port explicitly configured as Edge will disable itself upon reception of a BPDU. The port will enter the error-disabled state, and will be removed from the active topology.
Edge Port BPDU Guard is enabled
Edge Port BPDU Guard is disabled (This is the default.)
Port Error Recovery Set or show Port Error Recovery status. When Port Error Recovery is enabled, a port in the error-disabled state automatically will be enabled after a certain time. If recovery is not enabled, ports have to be disabled and re-enabled for normal STP operation. The condition is also cleared by a system reboot.
Port Error Recovery is enabled
Port Error Recovery is disabled (This is the default.)
Port Error Recovery Timeout Set or show the time to pass before a port in the error-disabled state can be enabled. Valid values are between 30 and 86400 seconds (24 hours).
4.28.3
STP Bridge Configuration Buttons Save: Click to save all changes Reset:
Click to undo any changes made locally and revert to previously saved values
SMB - CLI UM
Rev: 1.1
Page 144 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator