4.29
Spanning Tree – Bridge Ports
This page allows the user to inspect and change the current Spanning Tree Protocol (STP) Common Internal Spanning Tree (CIST) port configurations. This page contains settings for physical and aggregated ports.
4.29.1
STP CIST Port Configuration This section allows the user to configure the Bridge Configuration Basic settings (the parameters are the same for aggregated and normal ports): Port This column displays the switch port number of the logical STP port.
STP Enabled Set or show the STP status for this switch port.
STP is enabled on this switch port (This is the default.)
STP is disabled on this switch port
Path Cost Set or show the path cost incurred by the port. Auto:
Sets the path cost as appropriately, for the physical link speed, using the 802.1D recommended values.
Specific: The user enters a value to define the path cost.
SMB - CLI UM
Rev: 1.1
Page 145 of 275
www.amphenol-socapex.com
Tel : +33(0)4.50.89.28.00
Made with FlippingBook interactive PDF creator